Abstract:The analytical formula of grouting pressure for quasi-rectangular shield is derived, which is more complex than it for circular shield.The influencing factors and corresponding reasons of grout pressure distribution in the special-shaped space are analysed.The fluid motion law of synchronous grouting along unconventional path in shield tail void is revealed clearly.The pressure distribution patterns of grout along the circumferential and longitudinal directions are obtained.Considering that the particular geometric shape of a quasi-rectangular shield, the grout flowing law and its motion process are more complicated than those of a conventional circular shield. To interpret the grouting mechanical behavior in the special-shape shield tail void, the filling and diffusion mechanism of synchronous grouting was analysed. The grout flowing is separated into two independent motion processes, which contains a circumferential filling and a longitudinal diffusion. The theoretical model of the grout pressure spatial distribution was derived based on the principle of fluid mechanics. Then, the pressure distributions in the two directions were obtained using a case study and compared with the field measured data to verify the validation of the model. Although the overall spatial pattern of grout pressure distribution on the tunnel profile show a change trend dominated by the self-weight effect mostly, its local fluctuation characteristics is very abnormal relative to that of a circular shield tunnel. Moreover, the important factors in the model were analysed, including the grout material parameters, the grouting construction parameters, and some geometry parameters. The results show that the pressure loss along this way is positively correlated with the grout flow velocity and is sensitive to the shear yield stress of the grout. The pressure loss along the circumferential direction is the most sensitive to the thickness of the ring cake, and the value range suitable for the model should be 0.02–0.03 m. The pressure loss along the longitudinal diffusion direction is the most sensitive to the size of the tail void. The research results can provide a theoretical basis for the control of special-shape shield construction.

A study on grout consolidation and dissipation mechanism during shield backfilled grouting with considering time effect

Influences of grouting heave on overlying structures in shield tunneling

Numerical Investigation of Grout Diffusion Accounting for the Dynamic Pressure Boundary Condition and Spatiotemporal Variation in Slurry Viscosity

Research on DOT Shield Tunnel Back-filled Synchronous Grouting Diffusion and Segments Circumferential Pressure Distribution

Multiphase flow coupling analysis of shield synchronous grouting filling law with time-dependent viscosity

Study on the Floating of Large Diameter Underwater Shield Tunnel Caused by Synchronous Grouting

Study on the shear strength characteristics and source mechanism of early-age shield synchronous grouting materials

Backfill grouting diffusion law of shield tunnel considering porous media with nonuniform porosity

Study on the Influence of Back-fill Grouting Parameters in Unsaturated Strata on the Seismic Performance of Shield Tunnels

Displacement infiltration diffusion model of power-law grout as backfill grouting of a shield tunnel

Longitudinal splitting and grouting in deep buried rock layers based on the coupling effect between slurry and rock

Study on Permeation Grouting Rules for Loess and Method for Predicting Migration Radius

Research and evaluation on Water-dispersion resistance of synchronous grouting slurry in shield tunnel

Experimental Study on Fresh State Properties of Single-Liquid Semi-Inert Synchronous Grouting for Shield Tunnels in Water-Rich Sand Strata

Experimental-numerical investigation on grout diffusion and washout in rough rock fractures under flowing water

A semi‐elliptical surface compound diffusion model for synchronous grouting filling stage in specially shaped shield tunnelling

Spatial distribution model of the filling and diffusion pressure of synchronous grouting in a quasi-rectangular shield and its experimental verification

Experimental Study of High Performance Synchronous Grouting Materials Prepared with Clay

Research on slurry diffusion and seepage law in mining overburden fractures based on CFD numerical method

Advanced Grouting Model and Influencing Factors Analysis of Tunnels with High Stress and Broken Surrounding Rock

A computational method proposal on the determination of grouting parameters for shield construction in water-rich earth materials