Abstract:The load transmission property of large-diameter bored cast-in-situ deep and long pile in different soil layers under vertical load is analyzed on the basis of measuring data of static load test and pile stress measurement in Changzhou viaduct road project I. The test pile is loaded to destruction, which can supply valuable project reference to further studying bearing capacity of larger-diameter bored cast-in-situ long pile. The study indicates that the bearing capability of pile bottom in deep soil layer accounts for lower proportion than skin friction; and the Q-s curves of large-diameter bored cast-in-situ long pile show steep drop type, especially with a significant inflection point. Skin friction and tip resistance of the pile have mutual influence on each other and don't display simultaneously; and the same situation also exists in side friction in soil layer, which demonstrates that the above soil layer first reaches the limit state; and then the lower soil layer. Burying depth has significant influence on side friction of soil layers around pile which has similar physical mechanical property and some values about side friction have great difference to recommendation value of the reconnaissance report according to measuring data. The load transmission curves of soil layer (1) and soil layer (3) correspond to process-softening model, and the load transmission curves of soil around pile bottom correspond to bilinear rigid model, which demonstrates that side friction of above soil layers is weakened to some degree for the soil layers have tendency to be destroyed by shearing; and a great deal of tip resistance of the pile is not displayed under vertical load.

Research on conversion coefficient of cast-in-situ pile in clay in self-balanced loading test

Assessment of design methods for axial bearing capacity of driven piles in clay

Field Tests of Offshore Driven Piles Subjected to Lateral Monotonic and Cyclic Loads in Soft Clay

Research on conversion method of self-balanced pile test in collapsible loess

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

Model Test Study of Bearing Behavior of Small Prefabricated Piles in Soft Soil Area

STUDY ON VERTICAL BEARING CAPACITY OF LARGE-DIAMETER CAST-IN-SITU THIN-WALL TUBULAR PILE

Bearing Behaviors of Self-Balanced Pile

A test on base bearing capacity of static drill rooted nodular pile

Experimental Study on Bearing Capacity Behavior of Deep Large Diameter Cast-in-place Belled Pile

Conversion factor analysis of self-balanced loading test of cast-in-situ piles based on analogue test method

Field Tests and Simplified Calculation Method for Static Drill Rooted Nodular Pile

Research on In-Situ Tests of Pile Load Transfer Behaviors in Composite Foundation with Rigid-Flexible Piles

RESEARCH ON INFLUENCE OF SOIL CORE ON BEARING CHARACTER OF LARGE-DIAMETER TUBULAR PILE USING CAST-IN-SITU CONCRETE

Experimental Study and Numerical Analysis of the Composite Pile

Field Test Study of Pile-Soil Load Transfer Characteristics of X-shaped Cast-in-place Pile

Theoretical Analysis of Postconstruction Load-Carrying Capacity of a Cast-in-Place Pile Installed in K 0 -Consolidated Anisotropic Clayey Soil

Field Tests on Bearing Characteristics of X-Section Pile Composite Foundation

Theory and Practice of Self-balanced Loading Test for Pile Bearing Capacity

EXPERIMENTAL STUDY OF LOAD TRANSMISSION PROPERTY OF LARGE-DIAMETER BORED CAST-IN-SITU DEEP AND LONG PILE IN DIFFERENT SOIL LAYERS

A new equivalent transformation method for calculating the pile bearing capacity on self-balancing test results