Abstract:Dual fluidized bed (DFB) reactor systems are widely used in gas–solid two-phase flow applications, whose gas–solid flow characteristics have a significant effect on the performance of many kinds of technologies. A numerical simulation model was established on the basis of a large-scale DFB reactor with a maximum height of 21.6 m, and numerical simulations focused on gas–solid flow characteristics were carried out. The effects of the superficial gas velocity of both beds and the static bed height and particle size on the distribution of the pressure and solid suspension density and the solid circulation rate were studied. The simulation results were in good agreement with the experimental data. With the strong support of the experimental data, the gas–solid flow characteristics of large-scale DFB reactors were innovatively evaluated in this numerical simulation study, which effectively makes up for the shortcomings of the current research. The results showed that the superficial gas velocity of both beds and the static bed height have different degrees of influence on the gas–solid flow characteristics. Specifically, for 282 μm particles, when the superficial gas velocity of both beds and the static bed height were 4.5 m/s, 2.5 m/s, and 0.65 m, respectively, under typical working conditions, the bottom pressure of the two furnaces was 3412.42 Pa and 2812.86 Pa, respectively, and the solid suspension density was 409.44 kg/m3 and 427.89 kg/m3, respectively. Based on the simulation results, the empirical formulas of the solid circulation rate were fitted according to different particle sizes. Under similar conditions, the solid circulation rates of particles with a particle size of 100 μm, 282 μm, 641 μm, and 1000 μm were 2.84–13.28, 0.73–4.91, 0.024–0.216, and 0.0026–0.0095 kg/(m2s), respectively. It can be found that the influence of the particle size on the solid circulation rate is the most significant among all parameters.

Numerical Simulation of Flow Field and the Study of the Uniform Distribution of Fluid in Uranium Hydrometallurgy Fixed Bed Based on CFD

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Numerical Study of Dense Solid-Liquid Flow in Hydrodynamic Vortex Separator Applied in Recirculating Biofloc Technology System

Numerical simulation of flow and heat transfer in journal bearing lubrication

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Numerical simulation of gas-solids fluidized bed with applied electric field

Numerical simulation of radiation heat transfer characteristics in a cylindrical fluidized bed

Coupled heat transfer simulations for evaluation of thermal performance during hydrogen absorption in cylindrical uranium-based hydride beds

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Numerical simulation of uranium tetrafluoride fluorination in a multistage spouted bed using the improved CFD-DEM chemical reaction model

Numerical Simulation Study on the Gas–Solid Flow Characteristics of a Large-Scale Dual Fluidized Bed Reactor: Verification and Extension

Modeling and Simulation of Flow and Uranium Isotopes Separation in Gas Centrifuges Using Implicit Coupled Density-Based Solver in OpenFOAM

Numerical Simulation of Uranium Extraction from Nitric Acid Medium Using Hollow-Fiber Contactor

Numerical Simulation of Gas-particle Hydrodynamics in CFB

Numerical Simulation of Cross Flow in Fixed Bed Reactor

Numerical Simulation of Separation of Water Load Magnetic Particles in High Gradient Magnetic Field

Numerical simulation on heat transfer performance in fin-plate adsorption bed

CFD modelling and simulation of hydrodynamics in liquid-solid circulating fluidized beds

Review on Application of Fluidized Bed Technology in Industry of Uranium Fuel Cycle

Study on the effect of flow field optimization on flotation efficiency