Abstract:Fluidization of gas-solid system is long-standing subject of basic research. As a result of fluid-particle intensive contact, an isothermal system with superior heat and mass transfer abilities favors its use for chemical reactions, mixing, drying, and other applications. Inspire of huge benefits, number of problems are still associated with gas-solid fluidization system. Solid properties, in particular, particle size and size distribution significantly affect the interaction/contacting between particles, their movement and the fluid-particle mixing. Distinct macroscopic phenomena of plug formation, channeling and particle agglomeration was observed with increasing superficial gas velocity in conventional fluidized bed of fine/nano-particles (group C in the Geldart classification) due to strong interparticle forces. The concept of powder–particle fluidized bed (PPFB) was first introduced by Kato et al. in early 1990s [1]. It is known to be a useful technique to fluidize group C particles without external aid like acoustic, centrifugal, magnetic, stirring and/or vibrating fields, etc. In the PPFB process, fine powders (group C) are fluidized with coarse particles (group B). The bimodal fluidized bed system at steady state gives a certain stable hold-up of fine powders in the bed [2]. Many investigators, Sun and Grace [3], and Xue et al. [4] studied bi-modal fluidization in bubbling or turbulent regimes, while, Wei et al. [5] and Du [6, 7] concentrate on CFBs. The investigation of Xue et al. showed that by adding coarse particles fluidization quality of fine particles could improve [4]. Extensive studies of Wei et al. indicated that the addition of coarse particles to a fluid catalytic cracking (FCC) riser decreased the lateral solids mixing and had insignificant influence on axial solids mixing [5]. Du et al. studied the axial and lateral mixing by using tracer particles of different sizes in a FCC riser and found that the axial solids back mixing increased, while radial solids mixing decreased with the increase of particle size and density. Recently, Zeeshan et al. explained bi-modal/bi-particle fluidized bed system hydrodynamics, attrition, mixing behaviour, and its applications [8]. Stable and uniform heat transfer in Fluidized Bed Reactors (FBR) without providing provisions of external or internal source is a difficult task for designers. As continuous heat supply and deduction is a necessary part of FBR operation for controlling highly endothermic and exothermic reactions, respectively. The state-of-the-art idea of bi-modal particle (Gas-Solid-Solid) fluidization is given by FLOTU, in order to overcome above said reaction barriers in a fluidized bed technology. In this chapter, a comprehensive overview of

Review on Application of Fluidized Bed Technology in Industry of Uranium Fuel Cycle

Applications of fluidized bed reactors in wastewater treatment – A review of the major design and operational parameters

Numerical Simulation of Flow Field and the Study of the Uniform Distribution of Fluid in Uranium Hydrometallurgy Fixed Bed Based on CFD

A comprehensive review of radioactive pollution treatment of uranium mill tailings

Review of Upflow Anaerobic Sludge Blanket Reactor Technology: Effect of Different Parameters and Developments for Domestic Wastewater Treatment

Author Response for "multi‐scale Study of Fluidized Bed‐chemical Vapour Deposition Process in Nuclear Fuel Coated Particle Fabrication for High‐temperature Gas‐cooled Reactor: A Review"

Application of Fluid Control Agent in In-situ Leaching of Uranium

Electrically Heated Fluidized Beds─A Review

Review of biomass-based materials for uranium adsorption

Multi‐scale study of fluidized bed‐chemical vapour deposition process in nuclear fuel coated particle fabrication for high‐temperature gas‐cooled reactor: A review

Emerging Natural and Tailored Materials for Uranium-Contaminated Water Treatment and Environmental Remediation

A review of remediation technologies for uranium-contaminated water

Extraction of Actinides and Lanthanides by Supercritical Fluid

Dual-dense gas-solid circulating fluidized bed reactor

Integrated Approach For Heat Transfer In Fluidized Bed Reactors

Research Progress and Prospect of Fluidized Bed Metallic Ore Roasting Technology: A Review

Discussion on Some Aspects of Circulating Fluidized Bed Design

Radioactive Wastewater Treatment Technologies: A Review

CFD Simulations of Gas–liquid–solid Flow in Fluidized Bed Reactors — A Review

Review on the Nanoparticle Fluidization Science and Technology

Progress and perspective in enrichment and separation of radionuclide uranium by biomass functional materials