Abstract:Fluidization of gas-solid system is long-standing subject of basic research. As a result of fluid-particle intensive contact, an isothermal system with superior heat and mass transfer abilities favors its use for chemical reactions, mixing, drying, and other applications. Inspire of huge benefits, number of problems are still associated with gas-solid fluidization system. Solid properties, in particular, particle size and size distribution significantly affect the interaction/contacting between particles, their movement and the fluid-particle mixing. Distinct macroscopic phenomena of plug formation, channeling and particle agglomeration was observed with increasing superficial gas velocity in conventional fluidized bed of fine/nano-particles (group C in the Geldart classification) due to strong interparticle forces. The concept of powder–particle fluidized bed (PPFB) was first introduced by Kato et al. in early 1990s [1]. It is known to be a useful technique to fluidize group C particles without external aid like acoustic, centrifugal, magnetic, stirring and/or vibrating fields, etc. In the PPFB process, fine powders (group C) are fluidized with coarse particles (group B). The bimodal fluidized bed system at steady state gives a certain stable hold-up of fine powders in the bed [2]. Many investigators, Sun and Grace [3], and Xue et al. [4] studied bi-modal fluidization in bubbling or turbulent regimes, while, Wei et al. [5] and Du [6, 7] concentrate on CFBs. The investigation of Xue et al. showed that by adding coarse particles fluidization quality of fine particles could improve [4]. Extensive studies of Wei et al. indicated that the addition of coarse particles to a fluid catalytic cracking (FCC) riser decreased the lateral solids mixing and had insignificant influence on axial solids mixing [5]. Du et al. studied the axial and lateral mixing by using tracer particles of different sizes in a FCC riser and found that the axial solids back mixing increased, while radial solids mixing decreased with the increase of particle size and density. Recently, Zeeshan et al. explained bi-modal/bi-particle fluidized bed system hydrodynamics, attrition, mixing behaviour, and its applications [8]. Stable and uniform heat transfer in Fluidized Bed Reactors (FBR) without providing provisions of external or internal source is a difficult task for designers. As continuous heat supply and deduction is a necessary part of FBR operation for controlling highly endothermic and exothermic reactions, respectively. The state-of-the-art idea of bi-modal particle (Gas-Solid-Solid) fluidization is given by FLOTU, in order to overcome above said reaction barriers in a fluidized bed technology. In this chapter, a comprehensive overview of

Electrically Heated Fluidized Beds─A Review

Critical Comparison of Electrostatic Effects on Hydrodynamics and Heat Transfer in a Bubbling Fluidized Bed with a Central Jet

Experimental Investigation of Electrostatic Effect on Particle Motions in Gas-Solid Fluidized Beds

Integrated Approach For Heat Transfer In Fluidized Bed Reactors

Characteristics and applications of micro fluidized beds (MFBs)

Development and Problems of Fluidized Bed Ironmaking Process: An Overview

CFD Modelling of the Co-Gasification of Biomass and Coal Particles in Fluidised Beds

Status of electromagnetic heating for enhanced heavy oil/bitumen recovery and future prospects: A review

From bubbling to circulating fluidized bed combustion-development and comparison

Advancements of the Fluidized Bed Fenton (FBF) Technology for wastewater treatment: Mechanism, mass and heat transfer

A Comprehensive Review on Electrohydrodynamic Drying and High-Voltage Electric Field in the Context of Food and Bioprocessing

Development of a New External Heat Exchanger for a Circulating Fluidized Bed Boiler

Advances in heat exchangers for heat and mass transfer: a review

Application of Multi-pass Circulating Fluidized Bed in Integrated Energy Service

Review on Application of Fluidized Bed Technology in Industry of Uranium Fuel Cycle

Applications of fluidized bed reactors in wastewater treatment – A review of the major design and operational parameters

Steam gasification of biomass in dual fluidized bed gasifiers: A review

Absorption heating technologies: A review and perspective

Dual-dense gas-solid circulating fluidized bed reactor

Development of fluidized bed combustion—An overview of trends, performance and cost

Development of new ash cooling method for atmospheric fluidized beds