Abstract:Four types of Al/MoO3 micro energetic semiconductor bridge (MESCB) initiators were prepared by integrating 3 mu m Al/MoO3 reactive multilayer films (RMFs) on micro semiconductor bridge (MSCB) with different bridge areas. The bridge areas were varied from 11661 mu m(2) to 489 mu m(2), and the ratio of length to width, the thickness, V-type angle were fixed at 0.54, 2.5 mu m, 90, respectively. The heating process of MSCB before electrical explosive was analyzed with multi physical simulation (MPS). The electrical explosive characteristics of these MESCB as well as MSCB were investigated under the stimulation of 47 mu F tantalum capacitor discharge. The MPS results reveal that the V-shaped sharp corner of MSCB has highest temperature and the completed melting time of MSCB is decreased with lowing of bridge area. The critical burst time and critical burst energy of MSCB and MESCB also decrease with the decreasing of bridge area. When bridge area is 11661 mu m(2), the critical burst time of MSCB and MESCB drops with applied voltage, while critical burst energy is independent on applied voltage. Besides, the critical burst time and energy of MESCB are the higher than that of MSCB with bridge area of 11661 mu m(2). When the bridge area is reduced to 2915 mu m(2), the critical burst time and critical burst energy for MESCB are no significant difference with the corresponding MSCB. In addition, the critical burst time MSCB and MESCB have no relationship with outer stimulation energy as the bridge area further decrease at 489 mu m(2). The flame duration time of MESCB barely decreases when lowing the bridge area, which suggests that the energy consumption of MESCB can be reduced by decreasing the bridge area without weakening its firing performance.

Study on the Design of Bridge Microstructure for Energy Conversion Components

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Design and optimization of micro-semiconductor bridge used for solid propellant microthrusters array

Study on Film Resistivity of Energy Conversion Components for MEMS Initiating Explosive Device

An Optimization Approach for Contact-Separation Triboelectric Nanogenerator Harvesting Bridge Vibrations

Characteristics of Micro Energetic Semiconductor Bridge Initiator by Depositing Al/MoO3 Reactive Multilayered Films on Micro Bridge with Different Bridge Size

Electro-explosive Characteristics of An Energetic Semi-conductor Bridge by Integrating Al/MoO3Reactive Multilayer Films with Various Modulation Ratio

Note: the influence of exploding foil shape on energy deposition

Design and Performance of a Micro-Scale Detonation Train with a Built-in Pyrotechnic MEMS-based Safety and Arming Device

A Micro Bridge-Wing-Thickened Low-Energy Exploding Foil Initiator Chip

Tuning the Ignition Performance of A Microchip Initiator by Integrating Various Al/Moo3 Reactive Multilayer Films on A Semiconductor Bridge

Characteristic Of Energetic Semiconductor Bridge Based On Al/Moox Energetic Multilayer Nanofilms With Different Modulation Periods

Identifying the Enhancement Mechanism of Al/MoO3 Reactive Multilayered Films on the Ignition Ability of Semiconductor Bridge Using a One-Dimensional Gas-Solid Two-Phase Flow Model

10.1063/1.4978371.4

Investigating the explosion process of nine-point exploding foil bridge

Analysis and verification of electrodynamic force, thermal stress and current sharing for CRAFT converter structure design

Meso-Simulation and Experimental Research on the Mechanical Behavior of an Energetic Explosive

Explosion responses of movable π -shaped box bridge: Experimental and numerical investigations

An On-Chip Bistable Structure for Extracting the Impact Fracture Strength of the Microstructure

Effects of microstructure on mechanical and energy release properties of Ni–Al energetic structural materials

Optimization Design of A Bridge Structure for Micro-nano Manufacturing Equipment