Abstract:Nanothermites possess much attentions relying on potential probability to the fields of the military and civilian. Whereas, the practical applications for nanothermites have been limited by the high electrostatic discharge (ESD) sensitivity and little gas generation, which is a pronounced problem in the microthruster particularly. In this work, the two typical nanothermites (Al/CuO and Al/MoO3, as Al/MXOY) were assembled with various contents of CL-20 to be defined Al/MXOY@CL-20. The characteristics of Al/MXOY@CL-20 were examined by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), powder X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The ignition properties of Al/MXOY@CL-20, such as burning rate, the unrestrained combustion, ignition temperature, delay time, pressurization and propulsion properties, were studied. In addition, the energy required for 50% ignition probability (E-50) was applied to evaluating the sensitivity of Al/MXOY@CL-20 to ESD. Results revealed that the total heat release for Al/MXOY@CL-20 was increased on account of CL-20, and CL-20 facilitated the transformation of CuO to Cu2O. The burning rates decreased with the increase of CL-20, whereas the burning rate of Al/MoO3@10%CL-20 was little higher than that of Al/MoO3. Al/CuO@10%CL-20 and Al/MoO3@30%CL-20 exhibited superior performances respectively for the maximum flame area, the lowest ignition temperature, the highest pressurization rate and specific impulse. The particular significance was that CL-20 played a positive role for Al/MXOY@CL-20 on the safety to ESD. For instance, the E-50 of Al/CuO@50%CL-20 was 163.84 mJ meanwhile Al/CuO of that was 0.24 mJ. In conclusion, in the light of the superior specific impulse and the excellent safety to ESD, Al/MXOY@CL-20 (especially Al/CuO@10%CL-20 and Al/MoO3@30%CL20) would possess the remarkable application prospects for practice in the microthruster. (c) 2022 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Tuning the Ignition Performance of A Microchip Initiator by Integrating Various Al/Moo3 Reactive Multilayer Films on A Semiconductor Bridge

Identifying the Enhancement Mechanism of Al/MoO3 Reactive Multilayered Films on the Ignition Ability of Semiconductor Bridge Using a One-Dimensional Gas-Solid Two-Phase Flow Model

10.1063/1.4978371.4

Spray Swirling Flame Dynamic under Combined Modulation of Air and Fuel

Characteristics of Energetic Semiconductor Bridge Initiator Based on Different Stoichiometric Ratios of Al/MoO3 Reactive Multilayer Films under Capacitor Discharge Conditions

Characteristic Of Energetic Semiconductor Bridge Based On Al/Moox Energetic Multilayer Nanofilms With Different Modulation Periods

Electro-explosive Characteristics of An Energetic Semi-conductor Bridge by Integrating Al/MoO3Reactive Multilayer Films with Various Modulation Ratio

Characteristics of Micro Energetic Semiconductor Bridge Initiator by Depositing Al/MoO3 Reactive Multilayered Films on Micro Bridge with Different Bridge Size

Design and optimization of micro-semiconductor bridge used for solid propellant microthrusters array

A Micro-Initiator Realized by In-Situ Synthesis of Three-Dimensional Porous Copper Azide and Its Ignition Performance

Firing Performance of Microchip Exploding Foil Initiator Triggered by Metal-Oxide-Semiconductor Controlled Thyristor

From nanoparticles to on-chip 3D nanothermite: electrospray deposition of reactive Al/CuO@NC onto semiconductor bridge and its application for rapid ignition

Ignition Characteristics of Energetic Nichrome Bridge Initiator Based on Al/CuO Reactive Multilayer Films under Capacitor Discharge and Constant Current Conditions

From nanoparticles to on-chip 3D nanothermite: electrospray deposition of reactive Al/CuO@NC onto semiconductor bridge and its application for rapid ignition.

Controlling the Energetic Characteristics of Micro Energy Storage Device by in Situ Deposition Al/MoO3 Nanolaminates with Varying Internal Structure

Experimental and Modeling Investigation on the Self-Propagating Combustion Behavior of Al-MoO3 Reactive Multilayer Films

Characteristics of the Energetic Micro-initiator Through Integrating Al/Ni Nano-multilayers with Cu Film Bridge

An Excellent Synergy Between CL-20 and Nanothermites in Flaming and Propelling with High Specific Impulse and Superior Safety to Electrostatic Discharge

In-situ synthesis of MEMS compatible Al/Cu2HIO6/PVDF Metastable composites film with high combustion performance

Enhanced Energetic Performances Based on Integration with the Al/PTFE Nanolaminates

A Micro Bridge-Wing-Thickened Low-Energy Exploding Foil Initiator Chip