Abstract:Nanothermites possess much attentions relying on potential probability to the fields of the military and civilian. Whereas, the practical applications for nanothermites have been limited by the high electrostatic discharge (ESD) sensitivity and little gas generation, which is a pronounced problem in the microthruster particularly. In this work, the two typical nanothermites (Al/CuO and Al/MoO3, as Al/MXOY) were assembled with various contents of CL-20 to be defined Al/MXOY@CL-20. The characteristics of Al/MXOY@CL-20 were examined by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), powder X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The ignition properties of Al/MXOY@CL-20, such as burning rate, the unrestrained combustion, ignition temperature, delay time, pressurization and propulsion properties, were studied. In addition, the energy required for 50% ignition probability (E-50) was applied to evaluating the sensitivity of Al/MXOY@CL-20 to ESD. Results revealed that the total heat release for Al/MXOY@CL-20 was increased on account of CL-20, and CL-20 facilitated the transformation of CuO to Cu2O. The burning rates decreased with the increase of CL-20, whereas the burning rate of Al/MoO3@10%CL-20 was little higher than that of Al/MoO3. Al/CuO@10%CL-20 and Al/MoO3@30%CL-20 exhibited superior performances respectively for the maximum flame area, the lowest ignition temperature, the highest pressurization rate and specific impulse. The particular significance was that CL-20 played a positive role for Al/MXOY@CL-20 on the safety to ESD. For instance, the E-50 of Al/CuO@50%CL-20 was 163.84 mJ meanwhile Al/CuO of that was 0.24 mJ. In conclusion, in the light of the superior specific impulse and the excellent safety to ESD, Al/MXOY@CL-20 (especially Al/CuO@10%CL-20 and Al/MoO3@30%CL20) would possess the remarkable application prospects for practice in the microthruster. (c) 2022 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Characteristics of Energetic Semiconductor Bridge Initiator Based on Different Stoichiometric Ratios of Al/MoO3 Reactive Multilayer Films under Capacitor Discharge Conditions

Electro-explosive Characteristics of An Energetic Semi-conductor Bridge by Integrating Al/MoO3Reactive Multilayer Films with Various Modulation Ratio

Characteristic Of Energetic Semiconductor Bridge Based On Al/Moox Energetic Multilayer Nanofilms With Different Modulation Periods

10.1063/1.4978371.4

Characteristics of Micro Energetic Semiconductor Bridge Initiator by Depositing Al/MoO3 Reactive Multilayered Films on Micro Bridge with Different Bridge Size

Tuning the Ignition Performance of A Microchip Initiator by Integrating Various Al/Moo3 Reactive Multilayer Films on A Semiconductor Bridge

Identifying the Enhancement Mechanism of Al/MoO3 Reactive Multilayered Films on the Ignition Ability of Semiconductor Bridge Using a One-Dimensional Gas-Solid Two-Phase Flow Model

Ignition Characteristics of Energetic Nichrome Bridge Initiator Based on Al/CuO Reactive Multilayer Films under Capacitor Discharge and Constant Current Conditions

Characteristics of the Energetic Micro-initiator Through Integrating Al/Ni Nano-multilayers with Cu Film Bridge

Energetic initiators with narrow firing thresholds using Al/CuO Schottky junctions

Controlling the Energetic Characteristics of Micro Energy Storage Device by in Situ Deposition Al/MoO3 Nanolaminates with Varying Internal Structure

From nanoparticles to on-chip 3D nanothermite: electrospray deposition of reactive Al/CuO@NC onto semiconductor bridge and its application for rapid ignition

From nanoparticles to on-chip 3D nanothermite: electrospray deposition of reactive Al/CuO@NC onto semiconductor bridge and its application for rapid ignition.

Firing Performance of Microchip Exploding Foil Initiator Triggered by Metal-Oxide-Semiconductor Controlled Thyristor

Design and optimization of micro-semiconductor bridge used for solid propellant microthrusters array

An Excellent Synergy Between CL-20 and Nanothermites in Flaming and Propelling with High Specific Impulse and Superior Safety to Electrostatic Discharge

Experimental and Modeling Investigation on the Self-Propagating Combustion Behavior of Al-MoO3 Reactive Multilayer Films

Characteristics of the Energetic Igniters Through Integrating Al/NiO Nanolaminates on Cr Film Bridge.

Preliminary discussion on the ignition mechanism of exploding foil initiators igniting boron potassium nitrate

Enhanced Energetic Performances Based on Integration with the Al/PTFE Nanolaminates

Characteristics of an antistatic semiconductor bridge based on micro/nano processing techniques