Abstract:This paper presents the design of a low power (8 W) water-fed vaporizing liquid microthruster that operates in the Leidenfrost boiling regime. The direct thrust measurements show the proposed design is able to produce one of the best specific impulse amongst all similar microthrusters reported in the literature. One of the important features that enables the superior performance is the high heat flux miniature molybdenum heating elements fabricated inside the vaporization chamber in a single silicon device package of dimensions 35 mm. 35 mm. 1.05 mm. The molybdenum heating elements are capable of producing a heat flux output of 370 kW/m(2) resulting in a sustained operational pressure of 2 bar and temperature of 446 K. The specific design details, such as choice of configurations and sizing, are given in this paper. In particular, the choice of material and the fabrication process carried out at the in-house nanosystem fabrication facility are described. The experimental setup and uncertainty analysis of the mN-range hanging pendulum direct thrust measurement stand are presented. Then, the evaporation of liquid water propellant is investigated in detail. The occurrence of Leidenfrost effect inside the vaporization chamber is captured with a high-speed camera at a frame rate of 5000 Hz. It can be seen that the rapid vaporization of propellant in the Leidenfrost boiling regime results in a high specific impulse amongst other microelectromechanical-system-scale vaporizing liquid microthrusters. The direct thrust measurements show the current design is capable of producing a specific impulse ranging between 25.9-51.1 s at a continuous thrust level of 1.00-2.00 mN; considering contemporary energy storage technologies, the estimated thrust per device dry mass and specific impulse per device dry mass levels are 4.0-8.0 mN/kg and 103.6-204.0 s/kg respectively.

Design and optimization of micro-semiconductor bridge used for solid propellant microthrusters array

Superior Performance of a MEMS-based Solid Propellant Microthruster (SPM) Array with Nanothermites

Tuning the Ignition Performance of A Microchip Initiator by Integrating Various Al/Moo3 Reactive Multilayer Films on A Semiconductor Bridge

A Summary of MEMS Based Solid Propellant Microthrusters (SPM) Array

Study on Large-Scale Arrayed Micro Thruster with Nano Propellant

A review on solid propellant micro-thruster array based on MEMS technology

Design and Test of a Micro Digital Thruster

Identifying the Enhancement Mechanism of Al/MoO3 Reactive Multilayered Films on the Ignition Ability of Semiconductor Bridge Using a One-Dimensional Gas-Solid Two-Phase Flow Model

Study on the Design of Bridge Microstructure for Energy Conversion Components

Design and Modeling of MEMS-based Solid Propellant Propulsion

High-safety energetic micro-igniter for micro-thrust system

Characteristics of Micro Energetic Semiconductor Bridge Initiator by Depositing Al/MoO3 Reactive Multilayered Films on Micro Bridge with Different Bridge Size

The Development of an On-Chip Microinitiator with a Built-in Safety-and-arming Device.

MEMS-based propulsion arrays with solid propellant

Mems-Based Propulsion with Solid Propellant for Micro Satellite

Lab-on-PCB solid propellant microthruster with multi-mode thrust capabilities

Directional combustion induced by 3D aligned carbon channel arrays for combustion chamber-free micro-thruster

Design and Testing of a Microelectromechanical-System-based High Heat Flux Vaporizing Liquid Microthruster

10.1063/1.4978371.4

Design and Performance of a Micro-Scale Detonation Train with a Built-in Pyrotechnic MEMS-based Safety and Arming Device

Research on a MEMS pyrotechnic with a double-layer barrier safety and arming device