Abstract:Nanothermites possess much attentions relying on potential probability to the fields of the military and civilian. Whereas, the practical applications for nanothermites have been limited by the high electrostatic discharge (ESD) sensitivity and little gas generation, which is a pronounced problem in the microthruster particularly. In this work, the two typical nanothermites (Al/CuO and Al/MoO3, as Al/MXOY) were assembled with various contents of CL-20 to be defined Al/MXOY@CL-20. The characteristics of Al/MXOY@CL-20 were examined by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), powder X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The ignition properties of Al/MXOY@CL-20, such as burning rate, the unrestrained combustion, ignition temperature, delay time, pressurization and propulsion properties, were studied. In addition, the energy required for 50% ignition probability (E-50) was applied to evaluating the sensitivity of Al/MXOY@CL-20 to ESD. Results revealed that the total heat release for Al/MXOY@CL-20 was increased on account of CL-20, and CL-20 facilitated the transformation of CuO to Cu2O. The burning rates decreased with the increase of CL-20, whereas the burning rate of Al/MoO3@10%CL-20 was little higher than that of Al/MoO3. Al/CuO@10%CL-20 and Al/MoO3@30%CL-20 exhibited superior performances respectively for the maximum flame area, the lowest ignition temperature, the highest pressurization rate and specific impulse. The particular significance was that CL-20 played a positive role for Al/MXOY@CL-20 on the safety to ESD. For instance, the E-50 of Al/CuO@50%CL-20 was 163.84 mJ meanwhile Al/CuO of that was 0.24 mJ. In conclusion, in the light of the superior specific impulse and the excellent safety to ESD, Al/MXOY@CL-20 (especially Al/CuO@10%CL-20 and Al/MoO3@30%CL20) would possess the remarkable application prospects for practice in the microthruster. (c) 2022 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Superior Performance of a MEMS-based Solid Propellant Microthruster (SPM) Array with Nanothermites

A Summary of MEMS Based Solid Propellant Microthrusters (SPM) Array

Study on Large-Scale Arrayed Micro Thruster with Nano Propellant

A review on solid propellant micro-thruster array based on MEMS technology

Micropropulsion Characteristics of Nanothermites Prepared by Electrospray

Mems-Based Propulsion with Solid Propellant for Micro Satellite

Design and Modeling of MEMS-based Solid Propellant Propulsion

Design, Development, and Performance of an Ammonia Self-Managed Vaporization Propulsion System for Micro-Nano Satellites.

MEMS-based propulsion arrays with solid propellant

Lab-on-PCB solid propellant microthruster with multi-mode thrust capabilities

Review on MEMS-Based Solid Propellant Micro-Propulsion

Directional combustion induced by 3D aligned carbon channel arrays for combustion chamber-free micro-thruster

An Excellent Synergy Between CL-20 and Nanothermites in Flaming and Propelling with High Specific Impulse and Superior Safety to Electrostatic Discharge

Design and numerical analysis on a solid micro-thruster

From nanoparticles to on-chip 3D nanothermite: electrospray deposition of reactive Al/CuO@NC onto semiconductor bridge and its application for rapid ignition

From nanoparticles to on-chip 3D nanothermite: electrospray deposition of reactive Al/CuO@NC onto semiconductor bridge and its application for rapid ignition.

Low Temperature Eutectic Alloy Bonding Used in MEMS-Based Solid Propellant Microthrusters Array

Combustion Characteristics and Propulsive Performance of Boron/Ammonium Perchlorate Mixtures in Microtubes

Research Progress of Solid Propellant Micro-Thruster

Designing, Fabrication, and Test of a MEMS Colloid Thruster

Microfabricated electrospray emitter arrays with integrated extractor and accelerator electrodes for the propulsion of small spacecraft