National chronic respiratory disease mortality study. I. Prevalence and severity at death of chronic respiratory diseases in the United States, 1963.

R. Markush

DOI: https://doi.org/10.1016/0021-9681(68)90011-8

1968-06-01

Journal of Chronic Diseases

Abstract:

What problem does this paper attempt to address?

Mems-Based Propulsion with Solid Propellant for Micro Satellite

Z You,GF Zhang,Y Lin,SQ Hu,BX Li,ZJ Liu

DOI: https://doi.org/10.1109/rast.2005.1512564

2005-01-01

Abstract:In this paper we develop a micro thruster of MEMS propulsion with solid propellant thruster responding to the spatial constraints and MEMS characteristics. The micro thruster has low power and energy thresholds for ignition and no moving parts, so they are expected to be highly reliable. Fabrication and assembly of array of 36 micropropulsion units proved the technological feasibility and the functioning performances. The electro-thermal process and gas dynamic characteristic of the micropropulsion is modeled and analyzed,. Eventually, a test platform is designed for micro-Newton second impulse bit. The initial test shows that the impulse is 4-11 /spl mu/Ns.
Conceptual demonstration of a modular fabrication method for an engineering model of a small monopropellant thrusters

Jeongrak Lee,Seonghyeon Kim,Jiho Ryoo,Hongjae Kang,Anna Lee

DOI: https://doi.org/10.1016/j.actaastro.2024.03.039

IF: 2.954

2024-03-23

Acta Astronautica

Abstract:We present an innovative modular fabrication method for a green monopropellant thruster, employing printed circuit boards (PCB) as fundamental building blocks for rapid and efficient performance optimization. This PCB-based approach offers superior thermal and structural characteristics to conventional MEMS-based microthrusters. Furthermore, it streamlines mass production and facilitates the swift and reliable assembly of thrusters using well-established PCB surface mount technology. In this study, we present a conceptual demonstration of this pioneering materials and fabrication technique, exemplified by the development of a 200 mN thrust monopropellant thruster utilizing 90 wt% hydrogen peroxide. Subsequently, we conduct propulsion experiments and consistently observe identical patterns in pulse mode firing tests, demonstrating the repeatability of the system. The experimental results, including thrust and C * efficiencies, provide substantial evidence for the validity and feasibility of our proposed approach. The modular fabrication method presented in this study exhibits high potential for mass production of small satellite thrusters, effectively addressing the expanding thruster market.

engineering, aerospace
Study on Large-Scale Arrayed Micro Thruster with Nano Propellant

Dahai Ren,Gaofei Zhang,Xiaolu Wang,You, Zheng

DOI: https://doi.org/10.1109/nano.2008.146

2008-01-01

Abstract:This paper introduces a micro MEMS thrusters array, including the thruster unit structure, fabrication result and the solid propellant. A four layers MEMS structure is designed for the thruster unit and the sample after packaging is presented. The double-base propellant and AP/HTPB/A1 composite propellant are investigated in detail. Meanwhile, two ignition schemes are studied including the directly ignition by ignition resistor and the indirectly propellant ignition by the heat released from the ignition powder deflagration. Granularity lead styphnate is selected as the ignition powder. Based on the analyses of the propellant energy, the paper gives the propellant prescription. The thruster ignition experiments are completed and the tests of the sample ignition voltage for two different ignition modes are compared. The statistics and the analysis of the ignition success rate are presented. It is shown that this structure and the corresponding propellant can meet the requirement of micro space attitude control system.
A review on solid propellant micro-thruster array based on MEMS technology

Jianbing Xu,Jiangtao Zhang,Fuwei Li,Shiyi Liu,Yinghua Ye,Ruiqi Shen

DOI: https://doi.org/10.1016/j.fpc.2023.03.002

2023-01-01

FirePhysChem

Abstract:With the development of micro-spacecraft technology, micro-nano satellites have the advantages of small size, low power consumption, short development cycle, formation networking, etc., and can complete many complex space tasks at a lower cost. Micro-nano satellites require a micropropulsion system with the capability of performing precise total impulse and thrust to execute maneuvers, such as attitude control, orbital transfer, and gravitation compensation. In contrast to other micropropulsion systems, solid propellant microthrusters (SPM) arrays based on micro-electromechanical system (MEMS) technology possess a simple structure and quick response, which is a potential micropropulsion system. In recent years, many research groups have done a lot of research on SPM arrays. In this paper, the latest progress of SPM arrays is summarized from the aspects of structure design, propellant selection, bonding technology, ignition unit type and micro-thrust test, and some suggestions for the future development direction are given.
Design and Modeling of MEMS-based Solid Propellant Propulsion

YOU Zheng,ZHANG Gao-fei,LIN Yang,REN Da-hai

DOI: https://doi.org/10.3321/j.issn:1004-924x.2005.02.002

2005-01-01

Optics and Precision Engineering

Abstract:MEMS-based solid propellant propulsion was developed.The structural design and fabrication process of the thruster, as well as the approach of propellant injection are presented. A thermal conduct model of ignition phase was established, with which the effect of various parameters on the ignition delay is analyzed. Meanwhile, the development of the model for performance simulation of micro thruster is described. The result indicates that low density, thermal conductivity and specific heat of substrate material of ignitor resistor can reduce the ignition delay time and power consumption; under certain condition, increasing the exit-to-throat section ratio of nozzle will help to raise the thrust and impulse bit of the propulsion in vacuum. It can be concluded that MEMS-based propulsion can meet the requirement of miniaturization, micro thrust and high accurate impulse bit for the propulsion system of micro satellite.
MEMS-based propulsion arrays with solid propellant

张高飞,尤政,胡松启,李葆萱,王伯雄

DOI: https://doi.org/10.3321/j.issn:1000-0054.2004.11.016

2004-01-01

Abstract:A MEMS-based solid propellant propulsion array was developed to provide a miniature, highly accurate micro thrust impulse jet for a micro satellite propulsion system. The micro propulsion system has low power and energy thresholds for ignition and no moving parts, so they are expected to be highly reliable. The thruster design and fabrication process are described along with analysis of the propellant flow characteristics. Ignition and thrust tests were done on a prototype having a 6×6 array of micro thrusters. The ignition instantaneous power required for each unit is less than 1 W, the mean ignition voltage is less than 40 V, and the theoretical thrust force is about 1.7 mN. This working voltage is far less than that for electric propulsion with the same order thrust.
Review on MEMS-Based Solid Propellant Micro-Propulsion

Jianzhong Liu,Daolun Liang,Yang Wang,Yuxin Yang,Wei Shi,Junhu Zhou

DOI: https://doi.org/10.13494/j.npe.20150021

2016-01-01

Nanotechnology and Precision Engineering

Abstract:With the miniaturization of spacecraft, micro-propulsion technology research is becoming sig-nificant.MEMS-based solid propellant micro thruster enjoys many advantages, and thus has become the focus of micro-propulsion study.The background and advantages of MEMS-based solid propellant micro thruster study were reviewed.The progress in MEMS-based solid propellant micro thruster was explored, including its structure and assembly, ignition part, propellant, thrust test device design, modeling and numerical simulation.The problems in present studies are analyzed, and the perspectives in future work are proposed.
Design and Test of a Micro Digital Thruster

Dahai Ren,Gaofei Zhang,Xiaolu Wang,Zheng You

DOI: https://doi.org/10.1117/12.801179

2008-01-01

Abstract:To meet the requirement of the space applications, digital thrusters with larger scale units should be employed, which means that the dimension of each thruster unit should be further reduced. In this paper, the system function structure for the satellite attitude control is introduced and a micro arrayed thruster is designed to improve the ignition properties in tiny chambers. A four layers structure of the micro thruster unit is presented and the ignition resistor is studied in detail. The structural mechanics analyzing results and the fabrication sample are presented. As an important part, the solid propellant is analyzed and the prescription is presented. To improve the uniformity of the propellant loading, a special device is developed by which the propellant can be once loaded into the array. To test the performance of the thruster, we developed an optical measurement system based on a pendulum structure. The system principle is introduced and a series of mathematical model was established. The impulse measurement system based on laser interference is presented. By this system, the impulse property of the micro thruster based on the solid propellant is studied and the test results are analyzed.
A Summary of MEMS Based Solid Propellant Microthrusters (SPM) Array

Chengbo RU,Jianbing XU,Ji DAI,Yinghua YE,Peng ZHU,Yan HU,Ruiqi SHEN

DOI: https://doi.org/10.3969/j.issn.1001-8352.2016.06.001

2016-01-01

Abstract:[ ABSTRACT] The MEMS based solid propellant microthrusters ( SPM) array having the advantages of simple configura-tion, absence of moving parts, low energy dissipation, and high reliability, can be used as the micro propulsion system to implement altitude adjustment, gravity or drag compensation and orbital transfer. Many research groups at home or abroad have carried out research on SPM array. This review summarized technology and research advance of SPM array, including architectural design, solid propellant selection, bonding technology, layout of ignition circuit, and analysis of their merits and faults. Proposals were made on improving the thrust performance of microthruters by adjustment of nozzle structure and formula optimization of composite propellant. The ignition circuit is the prerequisite for the development of large-scale integrated SPM array.
Design, Development, and Performance of an Ammonia Self-Managed Vaporization Propulsion System for Micro-Nano Satellites.

Shu-jian Sun,Tao Meng,Zhong-he Jin

DOI: https://doi.org/10.1631/fitee.1800068

IF: 2.526

2019-01-01

Frontiers of Information Technology & Electronic Engineering

Abstract:An ammonia self-managed vaporization propulsion (ASVP) system for micro-nano satellites is presented. Compared with a normal cold gas or liquefied gas propulsion system, a multiplex parallel sieve type vaporizer and related vaporization control methods are put forward to achieve self-managed vaporization of liquefied propellant. The problems of high vaporization latent heat and incomplete vaporization of liquefied ammonia are solved, so that the ASVP system takes great advantage of high theoretical specific impulse and high propellant storage density. Furthermore, the ASVP operation procedure and its physical chemistry theories and mathematical models are thoroughly analyzed. An optimal strategy of thrust control is proposed with consideration of thrust performance and energy efficiency. The ground tests indicate that the ASVP system weighs 1.8 kg (with 0.34-kg liquefied ammonia propellant) and reaches a specific impulse of more than 100 s, while the power consumption is less than 10 W. The ASVP system meets multiple requirements including high specific impulse, low power consumption, easy fabrication, and uniform adjustable thrust output, and thus is suitable for micro-nano satellites.
Research Progress of Solid Propellant Micro-Thruster

Heping LI,Jianle HE,Daolun LIANG,Jianzhong LIU,Minghui WEI

DOI: https://doi.org/10.11809/bqzbgcxb2018.01.039

2018-01-01

Abstract:The structure of the solid propellant micro-thruster is simple,the energy density of the solid propellant micro-thruster is high,and the working property of the solid propellant micro-thruster is stable.Theses characteristics are beneficial to the integration of systems.The expected thrust and impulse of the thruster can be obtained by setting the structure and size of the micro thruster and the composition and content of the propellant.So the solid propellant micro-thruster is especially suitable for micro spacecraft to meet the needs of military and civil.However,the chamber of the micro-thruster is small,so the heat loss caused by the larger surface area and the microscale effect are high.Furthermore,the successful,quick ignition and sustained,steady and intense,efficient combustion of fuels in it are difficult,and that is the importance of the study.The structure type,ignition devices,material selection,propellant formulation and test systems,of the solid propellant micro-thruster are summarized,and the development direction is proposed.Boron is considered to be an attractive high-energy metallic fuel for use as the fuel-rich solid propellant because of its high gravimetric and volumetric caloric value during combustion.Therefore,the boron-based propellant as the energy element is selected,and its law of performance and improvement measures is studied.The direction for the optimization of the boron-based propellant formulation and the structure size of the micro thruster will be showed.
Superior Performance of a MEMS-based Solid Propellant Microthruster (SPM) Array with Nanothermites

Chengbo Ru,Fei Wang,Jianbing Xu,Ji Dai,Yun Shen,Yinghua Ye,Peng Zhu,Ruiqi Shen

DOI: https://doi.org/10.1007/s00542-016-3159-x

2016-01-01

Microsystem Technologies

Abstract:We propose top ignition MEMS-based solid propellant microthruster (SPM) array to satisfy the precise propulsion requirements of small spacecraft, especially micro/nanosatellites. A 10 × 10 SPM array prototype was fabricated and assembled by standard microfabrication processes. Nano-Al/CuO was chosen as the solid propellant because of its high combustion heat and safety. To improve the propulsion performance of the microthruster, nanothermites mesoparticles were assembled by electrospray mixing (ES) process. The Chemical Equilibrium with Application calculation result indicates that the addition of nitrocellulose (NC) acting as binder into the nanothermites would enhance the thrust performance. The test results verified this. An impulse testing stand was employed to measure the impulse generated by the assembled SPM array, and a high-speed camera was used to record the combustion process. The specific impulse (I sp) and total impulse (I) of the binder-free nano-Al/CuO were 10.2 s and 155.9 μN s, respectively. The propulsion values of the ES nanothermites increased monotonically with increasing NC content, and the max I sp and I were 27.2 s and 346.9 μN·s, respectively. A 3D X-ray microscope was used to analyze the fired SPM array. The results show that the discontinuous bonding layer led to undesired ignition of the neighboring units.
Development of Electric and Chemical Microthrusters

M. Tajmar,C. A. Scharlemann

DOI: https://doi.org/10.1155/2011/361215

IF: 1.4

2011-01-01

International Journal of Aerospace Engineering

Abstract:The increasing application of microsatellites (from 10 kg up to 100 kg) as well as CubeSats for a rising number of various missions demands the development of miniaturized propulsion systems. Fotec and The University of Applied Sciences at Wiener Neustadt is developing a number of micropropulsion technologies including both electric and chemical thrusters targeting high performance at small scales. Our electric propulsion developments include a series of FEEP (field emission electric propulsion) thrusters, of which the thrust ranges from μ N to mN level. The thrusters are highly integrated into clusters of indium liquid-metal-ion sources that can provide ultralow thrust noise and long-term stability. We are also developing a micro PPT thruster that enables pointing capabilities for CubeSats. For chemical thrusters, we are developing novel micromonopropellant thrusters with several hundred mN as well as a 1–3 N bipropellant microrocket engine using green propellants and high specific impulse performance. This paper will give an overview of our micropropulsion developments at Fotec, highlighting performance as well as possible applications.

engineering, aerospace
A Dual Mode Propulsion System for Small Satellite Applications

Kevin Gagne,M. McDevitt,Darren Hitt

DOI: https://doi.org/10.3390/aerospace5020052

IF: 2.66

2018-05-02

Aerospace

Abstract:This study focused on the development of a chemical micropropulsion system suitable for primary propulsion and/or attitude control for a nanosatellite. Due to the limitations and expense of current micropropulsion technologies, few nanosatellites with propulsion have been launched to date; however, the availability of such a propulsion system would allow for new nanosatellite mission concepts, such as deep space exploration, maneuvering in low gravity environments and formation flying. This work describes the design of "dual mode" monopropellant/bipropellant microthruster prototype that employs a novel homogeneous catalysis scheme. Results from prototype testing are reported that validate the concept. The micropropulsion system is designed to be fabricated using a combination of additively-manufactured and commercial off the shelf (COTS) parts along with non-toxic fuels, thus making it a low-cost and environmentally-friendly option for future nanosatellite missions.

engineering, aerospace
Study on MEMS Micro-Thruster Technology

尤政,张高飞,任大海

DOI: https://doi.org/10.3969/j.issn.1672-6030.2004.02.005

2004-01-01

Abstract:Spatial thruster is the important component for orbit maintenance, station keeping as well as special attitude control of the microsatellite. With the development of micro/nano satellites and their constellation and formation flying, more advanced spatial propulsion technology is required. In this paper, the review of MEMS-based micropropulsion developments is summarized. Based on it, the overall structure scheme of MEMS micro-thruster arrays is presented. Then the simulation and analysis of mechanical property of thruster unit, the fabrication of micro-thruster arrays prototype and the prediction of thrust force are introduced.
Optimization, Test and Diagnostics of Miniaturized Hall Thrusters

Jian W M Lim,Igor Levchenko,Muhammad W A B Rohaizat,Shiyong Huang,Luxiang Xu,Yu Fei Sun,George C Potrivitu,Jen S Yee,Roysmond Z W Sim,Youmei Wang,Svitlana Levchenko,Kateryna Bazaka,Shuyan Xu

DOI: https://doi.org/10.3791/58466

2019-02-16

Abstract:Miniaturized spacecraft and satellites require smart, highly efficient and durable low-thrust thrusters, capable of extended, reliable operation without attendance and adjustment. Thermochemical thrusters which utilize thermodynamic properties of gases as a means of acceleration have physical limitations on their exhaust gas velocity, resulting in low efficiency. Moreover, these engines demonstrate extremely low efficiency at small thrusts and may be unsuitable for continuously operating systems which provide real-time adaptive control of the spacecraft orientation, velocity and position. In contrast, electric propulsion systems which use electromagnetic fields to accelerate ionized gases (i.e., plasmas) do not have any physical limitation in terms of exhaust velocity, allowing virtually any mass efficiency and specific impulse. Low-thrust Hall thrusters have a lifetime of several thousand hours. Their discharge voltage ranges between 100 and 300 V, operating at a nominal power of <1 kW. They vary from 20 to 100 mm in size. Large Hall thrusters can provide fractions of millinewton of thrust. Over the past few decades, there has been an increasing interest in small mass, low power, and high efficiency propulsion systems to drive satellites of 50-200 kg. In this work, we will demonstrate how to build, test, and optimize a small (30 mm) Hall thruster capable of propelling a small satellite weighing about 50 kg. We will show the thruster operating in a large space environment simulator, and describe how thrust is measured and electric parameters, including plasma characteristics, are collected and processed to assess key thruster parameters. We will also demonstrate how the thruster is optimized to make it one of the most efficient small thrusters ever built. We will also address challenges and opportunities presented by new thruster materials.
Multimodal electrospray thruster for small spacecraft: design and experimental characterization

Peter Mallalieu,Manish Jugroot

DOI: https://doi.org/10.1007/s44205-024-00075-0

2024-07-02

Journal of Electric Propulsion

Abstract:Electrospray thrusters are a promising electric micropropulsion technology which could be used to meet the propulsion needs of nanosatellites, or for fine attitude control of larger spacecraft. Multimodal propulsion is the integration of two or more propulsion modes into a system which utilizes a common propellant. Indeed, spacecraft mission simulations and models have shown that this type of multimode propulsion capacity is exciting because of the flexibility and adaptability it provides mission designers and planners. A single spacecraft would have potential to execute drastically different mission profiles, and the exact mission could even be determined post-launch. The current paper investigates a micro-propulsion system which combines a droplet and ion mode electrospray emitter into a unified multimodal system (using an ionic liquid as the common propellant for both systems). The high relative thrust droplet mode emitter was fabricated from P3 borosilicate glass while the high efficiency ion mode emitter, Carbon Xerogel dense porous substrate, was fabricated in-house. To characterize the multimodal thruster, a full beam and time-of-flight (ToF) experimental setup were developed at the RMC Advanced Propulsion and Plasma Exploration Laboratory (RAPPEL) and experiments were conducted using a custom vacuum chamber. The ion mode emitter, with a beam comprised purely of ions had an onset voltage around 1400 V with an estimated thrust performance of 0.14 and specific impulse of 4040 s. For droplet mode, with a mixed beam comprised of around 17 droplets and 83 ions, an onset voltage of 1375 V with an estimated performance of thrust at 14 and specific impulse of 140 s were measured. The prototype thruster demonstrates how various electrospray emitters could be combined into a multimodal system to provide flexibility and adaptability in providing effective thrust for small satellites.

English Else
Space micropropulsion systems for Cubesats and small satellites: From proximate targets to furthermost frontiers

Igor Levchenko,Kateryna Bazaka,Yongjie Ding,Yevgeny Raitses,Stéphane Mazouffre,Torsten Henning,Peter J. Klar,Shunjiro Shinohara,Jochen Schein,Laurent Garrigues,Minkwan Kim,Dan Lev,Francesco Taccogna,Rod W. Boswell,Christine Charles,Hiroyuki Koizumi,Yan Shen,Carsten Scharlemann,Michael Keidar,Shuyan Xu

DOI: https://doi.org/10.1063/1.5007734

IF: 15

2018-02-22

Applied Physics Reviews

Abstract:Rapid evolution of miniaturized, automatic, robotized, function-centered devices has redefined space technology, bringing closer the realization of most ambitious interplanetary missions and intense near-Earth space exploration. Small unmanned satellites and probes are now being launched in hundreds at a time, resurrecting a dream of satellite constellations, i.e., wide, all-covering networks of small satellites capable of forming universal multifunctional, intelligent platforms for global communication, navigation, ubiquitous data mining, Earth observation, and many other functions, which was once doomed by the extraordinary cost of such systems. The ingression of novel nanostructured materials provided a solid base that enabled the advancement of these affordable systems in aspects of power, instrumentation, and communication. However, absence of efficient and reliable thrust systems with the capacity to support precise maneuvering of small satellites and CubeSats over long periods of deployment remains a real stumbling block both for the deployment of large satellite systems and for further exploration of deep space using a new generation of spacecraft. The last few years have seen tremendous global efforts to develop various miniaturized space thrusters, with great success stories. Yet, there are critical challenges that still face the space technology. These have been outlined at an inaugural International Workshop on Micropropulsion and Cubesats, MPCS-2017, a joint effort between Plasma Sources and Application Centre/Space Propulsion Centre (Singapore) and the Micropropulsion and Nanotechnology Lab, the G. Washington University (USA) devoted to miniaturized space propulsion systems, and hosted by CNR-Nanotec—P.Las.M.I. lab in Bari, Italy. This focused review aims to highlight the most promising developments reported at MPCS-2017 by leading world-reputed experts in miniaturized space propulsion systems. Recent advances in several major types of small thrusters including Hall thrusters, ion engines, helicon, and vacuum arc devices are presented, and trends and perspectives are outlined.

physics, applied
Designing, Fabrication, and Test of a MEMS Colloid Thruster

ZY Zhou,JJ Xiong,XY Ye,YH Wang,YY Feng

DOI: https://doi.org/10.1117/12.483164

2002-01-01

Abstract:A MEMS based micro colloid thruster (including an source emitter array and an extractor) is designed, fabricated and tested. Source emitter array of the thruster is silicon column etched by ICP. The negative electrode on the extractor can be controlled separately. After bonding together, a single emitter and extractor works on an electrical colloid propulsion principle, and produce mu N order thrust. Such a small and controllable thrust is the urgent requirement for a micro-satellite.Thrust test for the micro colloid thruster is made in high vacuum box. Thrust is acted on a cantilever beam, and the displacement of cantilever beam is detected by a current vortex sensor. Analysis to the recording data shows that the maxim thrust produced by a single emitter is about 2 mu N, which is agreement with theory estimate.

National chronic respiratory disease mortality study. I. Prevalence and severity at death of chronic respiratory diseases in the United States, 1963.

Mems-Based Propulsion with Solid Propellant for Micro Satellite

Conceptual demonstration of a modular fabrication method for an engineering model of a small monopropellant thrusters

Study on Large-Scale Arrayed Micro Thruster with Nano Propellant

A review on solid propellant micro-thruster array based on MEMS technology

Design and Modeling of MEMS-based Solid Propellant Propulsion

MEMS-based propulsion arrays with solid propellant

Review on MEMS-Based Solid Propellant Micro-Propulsion

Design and Test of a Micro Digital Thruster

A Summary of MEMS Based Solid Propellant Microthrusters (SPM) Array

Design, Development, and Performance of an Ammonia Self-Managed Vaporization Propulsion System for Micro-Nano Satellites.

Research Progress of Solid Propellant Micro-Thruster

Superior Performance of a MEMS-based Solid Propellant Microthruster (SPM) Array with Nanothermites

Development of Electric and Chemical Microthrusters

A Dual Mode Propulsion System for Small Satellite Applications

Study on MEMS Micro-Thruster Technology

Optimization, Test and Diagnostics of Miniaturized Hall Thrusters

Multimodal electrospray thruster for small spacecraft: design and experimental characterization

Space micropropulsion systems for Cubesats and small satellites: From proximate targets to furthermost frontiers

Designing, Fabrication, and Test of a MEMS Colloid Thruster