Abstract:Four types of Al/MoO3 micro energetic semiconductor bridge (MESCB) initiators were prepared by integrating 3 mu m Al/MoO3 reactive multilayer films (RMFs) on micro semiconductor bridge (MSCB) with different bridge areas. The bridge areas were varied from 11661 mu m(2) to 489 mu m(2), and the ratio of length to width, the thickness, V-type angle were fixed at 0.54, 2.5 mu m, 90, respectively. The heating process of MSCB before electrical explosive was analyzed with multi physical simulation (MPS). The electrical explosive characteristics of these MESCB as well as MSCB were investigated under the stimulation of 47 mu F tantalum capacitor discharge. The MPS results reveal that the V-shaped sharp corner of MSCB has highest temperature and the completed melting time of MSCB is decreased with lowing of bridge area. The critical burst time and critical burst energy of MSCB and MESCB also decrease with the decreasing of bridge area. When bridge area is 11661 mu m(2), the critical burst time of MSCB and MESCB drops with applied voltage, while critical burst energy is independent on applied voltage. Besides, the critical burst time and energy of MESCB are the higher than that of MSCB with bridge area of 11661 mu m(2). When the bridge area is reduced to 2915 mu m(2), the critical burst time and critical burst energy for MESCB are no significant difference with the corresponding MSCB. In addition, the critical burst time MSCB and MESCB have no relationship with outer stimulation energy as the bridge area further decrease at 489 mu m(2). The flame duration time of MESCB barely decreases when lowing the bridge area, which suggests that the energy consumption of MESCB can be reduced by decreasing the bridge area without weakening its firing performance.

Characteristic Of Energetic Semiconductor Bridge Based On Al/Moox Energetic Multilayer Nanofilms With Different Modulation Periods

10.1063/1.4978371.4

Electro-explosive Characteristics of An Energetic Semi-conductor Bridge by Integrating Al/MoO3Reactive Multilayer Films with Various Modulation Ratio

Characteristics of Energetic Semiconductor Bridge Initiator Based on Different Stoichiometric Ratios of Al/MoO3 Reactive Multilayer Films under Capacitor Discharge Conditions

Tuning the Ignition Performance of A Microchip Initiator by Integrating Various Al/Moo3 Reactive Multilayer Films on A Semiconductor Bridge

Characteristics of Micro Energetic Semiconductor Bridge Initiator by Depositing Al/MoO3 Reactive Multilayered Films on Micro Bridge with Different Bridge Size

Identifying the Enhancement Mechanism of Al/MoO3 Reactive Multilayered Films on the Ignition Ability of Semiconductor Bridge Using a One-Dimensional Gas-Solid Two-Phase Flow Model

Ignition Characteristics of Energetic Nichrome Bridge Initiator Based on Al/CuO Reactive Multilayer Films under Capacitor Discharge and Constant Current Conditions

Characteristics of the Energetic Micro-initiator Through Integrating Al/Ni Nano-multilayers with Cu Film Bridge

Energetic initiators with narrow firing thresholds using Al/CuO Schottky junctions

Coaxial Electrospinning Fabrication of Core-Shell Energetic Fibers and In-Situ Integration with SCB Exhibiting Superior Non-Contact Ignition

Design and optimization of micro-semiconductor bridge used for solid propellant microthrusters array

Controlling the Energetic Characteristics of Micro Energy Storage Device by in Situ Deposition Al/MoO3 Nanolaminates with Varying Internal Structure

Enhanced Energetic Performances Based on Integration with the Al/PTFE Nanolaminates

Study on the Design of Bridge Microstructure for Energy Conversion Components

From nanoparticles to on-chip 3D nanothermite: electrospray deposition of reactive Al/CuO@NC onto semiconductor bridge and its application for rapid ignition

From nanoparticles to on-chip 3D nanothermite: electrospray deposition of reactive Al/CuO@NC onto semiconductor bridge and its application for rapid ignition.

Characteristics of an antistatic semiconductor bridge based on micro/nano processing techniques

In Situ Synthesized MEMS Compatible Energetic Arrays Based on Energetic Coordination Polymer and Nano-Al with Tunable Properties

Performance of Integrated Exploding Foil Energy Conversion Unit Based on FPC

Effects of microstructure on mechanical and energy release properties of Ni–Al energetic structural materials