Abstract:A high-end permanent magnet (PM) synchronous motor's cogging torque is a significant performance measure (PMSM). During the running of the motor, excessive cogging torque will amplify noise and vibration. Therefore, the cogging torque must be taken into account while optimizing the design of motors with precise motion control. In this research, we proposed a local optimization-seeking approach (RSM+NSGA-II-LR) based on Response Surface Methodology (RSM) and Non-Dominated Sorting Genetic Algorithm-II (NSGA-II), which reduced the cogging torque of a permanent magnet synchronous motor (SPMSM). To reduce the complexity of optimization and increase its efficiency, the sensitivity analysis method was utilized to identify the structural parameters that had a significant impact on the torque performance. Second, RSM was utilized to fit the functional relationship between the structural parameters and each optimization objective, and NSGA-II was integrated to provide the Pareto solution for each optimization objective. The solution with a greater average torque than the initial motor and the lowest cogging torque was chosen, and a new finite element model (FEM) was created. On the basis of the sensitivity analysis, the structural factors that had the highest influence on the cogging torque were selected, and the RSM is utilized for local optimization to lower the cogging torque as much as feasible. The numerical results demonstrated that the optimization strategy presented in this study effectively reduced the cogging torque of the motor without diminishing the motor's average torque or increasing its torque ripple.

Cogging Torque Reduction for Outer Rotor Interior Permanent Magnet Synchronous Motor

A Cogging Torque Reduction Method for Surface Mounted Permanent Magnet Motor

Reduction Methods Using Canceling Effect for Cogging Torque in Dual-Stator PM Synchronous Machines

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Reduction of Cogging Torque in Permanent Magnet Synchronous Motor Using the Taguchi Method

Superposition Method for Cogging Torque Prediction in Permanent Magnet Machines with Rotor Eccentricity

Design Optimization with Outer Rotor Interior Permanent Magnet Synchronous Motor with Hybird Permanent Magnet

Computational Technologies for Low-Frequency Torque Ripple Suppression in Exterior-Rotor Permanent Magnet Motors

Cogging Torque Reduction in Permanent Magnet Flux-Switching Machines by Rotor Teeth Axial Pairing

Flux Weakening Control Of Interior Permanent Magnet Synchronous Machine To Improve Torque Performance

Optimization of cogging torque in outer rotor Permanent Magnet Synchronous Motors based on particle swarm algorithm

Optimization of the Different Pole Arc Combination to Reduce the Cogging Torque in PMDC Motors

Study of magnet shifting for reduction of cogging torque in permanent magnet motors

Method for Reducing Cogging Torque Based on Magnet Skewing in Disc-Type Permanent Magnet Motors

Design of Interior PM Synchronous Traction Motor with Novel Approximate Skewed Rotor

Research on Cogging Torque Reduction of Direct-Drive Type Dual-Rotor Radial Flux Permanent Magnet Synchronous Motor for Electric Propulsion Aircraft

Asymmetrical Magnets in Rotor Structure of a Permanent Magnet Brushless DC Motor for Cogging Torque Minimization

Cogging Torque Reduction of Permanent Magnet Motor Based on Particle Swarm Optimization Algorithm

Cogging Torque Minimization of Surface-Mounted Permanent Magnet Synchronous Motor Based on RSM and NSGA-II

Torque Ripple Reduction Method for Interior Permanent Magnet Synchronous Machine Drives with Minimal Loss

Combined Methods for Torque Variation Reduction of High-Speed FSPM