Abstract:With the gradual shift of coal mining to the western coal mining region of China, floor heave in weakly cemented mudstone roadways has become an issue affecting the safety and efficiency of coal mine production. Additionally, different mining rates can lead to fluctuating support stresses on the roof and floor of weakly cemented mudstone roadways. Therefore, obtaining a comprehensive understanding of the mechanical properties of weakly cemented mudstone at different loading rates is conducive to improving the issue of floor heave in such roadways and provides a theoretical basis for further study. In this context, a series of uniaxial mechanical tests with concurrent acoustic emission monitoring were conducted on specimens of weakly cemented mudstone under various loading rates (0.005, 0.01, 0.05, and 0.1 mm/s). The stress‒strain and acoustic emission response curves were obtained to effectively characterize the strength, deformation, damage, macroscale instability, and crack propagation characteristics of the mudstone under the influence of loading rate effects. The research results support the following findings: (1) With increasing loading rate, the peak strength and elastic modulus of weakly cemented mudstone significantly increase, while the peak axial strain and peak radial deformation significantly decrease. (2) With increasing loading rate, the stress required to trigger the expansion of weakly cemented mudstone gradually increases, and a significant power-law relationship arises between the strain of the mudstone at the start of expansion and the loading rate. (3) With increasing loading rate, the acoustic emission ringing count of weakly cemented mudstone increases: The failure of weakly cemented mudstone changes from small-range progressive failure to sudden failure, and the failure mode transitions from shear failure to tensile‒shear composite failure. (4) The studied mudstone damage variables increase with increasing loading rate, following an approximate exponential function. The conclusions obtained in this work can provide a theoretical basis for the evolution mechanism and control of floor heave in deep roadway mining.

Experimental Investigation on the Tensile Properties of Weakly Cemented Sandstone in China Shendong Mining Area

Deformation Field and Acoustic Emission Characteristics of Weakly Cemented Rock under Brazilian Splitting Test

Experimental Study on the Features of Infrasonic Waves of Sandstone under Shear Load

Experimental study on the spatial fracture behaviour of red sandstone containing weak inclusions with non-unitary geometric features under uniaxial compression

Experimental study on the deformation localisation and acoustic emission characteristics of coal in Brazilian splitting tests

Experimental study on the mechanical characteristics of weakly cemented mudstone under different loading rates

Experimental Study on Mechanical Behavior, Fracture Characteristics, and Acoustic Emission Damage Characteristics of Sandstone Under Triaxial Multistage Stress Disturbance

Laboratory Shear Behavior of Tensile- and Shear-Induced Fractures in Sandstone: Insights from Acoustic Emission

Experimental research on the mechanical and acoustic emission properties of layered sandstone during tensile failure

Brazilian disc test study on tensile strength-weakening effect of high pre-loaded red sandstone under dynamic disturbance

Study on crack propagation mechanism and acoustic-thermal sensitivity analysis of pre-cracked weakly cemented rock

Analysis of Fracture Modes and Acoustic Emission Characteristics of Low‐Frequency Disturbed Water‐Bearing Soft Rock With Different Cyclic Initial Value

Experimental Study on Mechanical Properties and Acoustic Emission Characteristics of Dry and Water-Saturated Soft Rocks under Different Dynamic Loadings

Experimental Study on Acoustic Emission Characteristics of Intermittent Jointed Rock Mass under Uniaxial Compression

Experimental study on mechanical behavior and permeability evolution of weakly cemented sandstone under unloading conditions

Investigation of the crack and acoustic emission behavior evolution of red sandstone subjected to water

Strength dependence of siltstone under coupled cyclic-monotonic loading tests and the evolution of three-dimensional acoustic emission source

Experimental Study on Acoustic Emission Features and Energy Dissipation Properties during Rock Shear-Slip Process

Experimental Investigation on Strength-Weakening Effect and Fracture Behavior of Red Sandstone under Coupled Static and Dynamic Cyclic Loadings

Stress–strain and acoustic emission characteristics of cement-based materials used to simulate soft rock with fractures

Thermal-hydraulic-mechanical coupling mechanical behavior and acoustic emission characteristics of deep sandstone