Abstract:With the gradual shift of coal mining to the western coal mining region of China, floor heave in weakly cemented mudstone roadways has become an issue affecting the safety and efficiency of coal mine production. Additionally, different mining rates can lead to fluctuating support stresses on the roof and floor of weakly cemented mudstone roadways. Therefore, obtaining a comprehensive understanding of the mechanical properties of weakly cemented mudstone at different loading rates is conducive to improving the issue of floor heave in such roadways and provides a theoretical basis for further study. In this context, a series of uniaxial mechanical tests with concurrent acoustic emission monitoring were conducted on specimens of weakly cemented mudstone under various loading rates (0.005, 0.01, 0.05, and 0.1 mm/s). The stress‒strain and acoustic emission response curves were obtained to effectively characterize the strength, deformation, damage, macroscale instability, and crack propagation characteristics of the mudstone under the influence of loading rate effects. The research results support the following findings: (1) With increasing loading rate, the peak strength and elastic modulus of weakly cemented mudstone significantly increase, while the peak axial strain and peak radial deformation significantly decrease. (2) With increasing loading rate, the stress required to trigger the expansion of weakly cemented mudstone gradually increases, and a significant power-law relationship arises between the strain of the mudstone at the start of expansion and the loading rate. (3) With increasing loading rate, the acoustic emission ringing count of weakly cemented mudstone increases: The failure of weakly cemented mudstone changes from small-range progressive failure to sudden failure, and the failure mode transitions from shear failure to tensile‒shear composite failure. (4) The studied mudstone damage variables increase with increasing loading rate, following an approximate exponential function. The conclusions obtained in this work can provide a theoretical basis for the evolution mechanism and control of floor heave in deep roadway mining.

Strength dependence of siltstone under coupled cyclic-monotonic loading tests and the evolution of three-dimensional acoustic emission source

Strengthening effect of cyclic load on siltstone and its macro–micro fracture mechanism

Fracturing and acoustic emission characteristics of saturated reservoir rocks under constant-amplitude-cyclic loading

Effect of stress amplitude on mechanical and acoustic emission of sandstone under constant–cyclic loading

Study on the fatigue properties and constitutive model of siltstone under the coupled action of dry‒wet cycles and cyclic loads

Study on the AE Characteristics and Energy Evolution Mechanism of Sandstone with Different Aspect Ratios Under Biaxial Compression

Experimental study on the mechanical characteristics of weakly cemented mudstone under different loading rates

Acoustic Emission Characteristics and Energy Evolution of Red Sandstone Samples under Cyclic Loading and Unloading

Acoustic Emission Characteristics of Red Sandstone Specimens Under Uniaxial Cyclic Loading and Unloading Compression

Experimental Study on Effect of Water on Progressive Failure Process of Siltstone

Acoustic emission characteristics and fracture mechanism of sandstone in open-pit mines under different types of cyclic loads

Mechanical properties of porous weakly cemented rocks under alternating creep-fatigue action

Experimental Study on Mechanical Behavior, Fracture Characteristics, and Acoustic Emission Damage Characteristics of Sandstone Under Triaxial Multistage Stress Disturbance

Experimental investigation on shear strength deterioration at the interface between different rock types under cyclic loading

Effects of Acoustic Emission and Energy Evolution of Rock Specimens Under the Uniaxial Cyclic Loading and Unloading Compression

Stress-induced AE varying characteristics in distinct lithologies subjected to uniaxial compression

Experimental study on mechanical and acoustic emission characteristics of sedimentary sandstone under different loading rates

Influence of the strength of rock-like models on the local deformation field and acoustic emission characteristics

Experimental investigation on the shear mechanical behavior and energy evolution of sandstone subjected to pre-peak cyclic loading

Characterization and differences of acoustic signals response of semi-circular red sandstone under combined monotonous and cyclic loadings

Strength and acoustic emission weakening mechanism of sandstone after prolonged water immersion: Insights from micro-fracture