Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

Stable Clusters Array of Silicon Nanowires Developed by Top-Plating Technique As a High-Performance Gas Sensor

Bioinspired supramolecular arrayed heterojunction-based room-temperature sensor for high-performance gas detection

WO3 Nanosheet/W18O49 Nanowire Composites for NO2 Sensing

Silicon nanowires by combined nanoimprint and angle deposition for gas sensing applications

Trilayer nanoimprint fabrication and simulation of the silicon nanowire sensor for gas detection

Silicon nanowire sensor for gas detection fabricated by nanoimprint on SU8/SiO2/PMMA trilayer

A vertical tip-tip contact silicon nanowire array for gas sensing

Evaluation of postural steadiness in below-knee amputees when wearing different prosthetic feet during various sensory conditions using the Biodex® Stability System

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Growth of carbon nanowalls at atmospheric pressure for one-step gas sensor fabrication

Enhanced performance of the tangerines-like CuO-based gas sensor using ZnO nanowire arrays

Enhanced gas-sensing performance of SnO2/Nb2O5 hybrid nanowires

Branching TiO2 Nanowire Arrays for Enhanced Ethanol Sensing

Wafer-level fabricated high-performance micro/nano gas sensor

Hierarchical WS2–WO3 Nanohybrids with P–N Heterojunctions for NO2 Detection

ZnO Nanorod/porous Silicon Nanowire Hybrid Structures As Highly-Sensitive NO2 Gas Sensors at Room Temperature

Highly Sensitive Ammonia Gas Detection at Room Temperature by Integratable Silicon Nanowire Field-Effect Sensors

High-precision Silicon Nanowire Array Sensor for quantitating ambient humidity and pH value

Single-Nanowire Fuse for Ionization Gas Detection

Chemical Gas Sensors Based On Nanowires

One-Dimensional Nanowire-Based Heterostructures for Gas Sensors