Abstract:For high-power UV laser facilities, one of the key problems limiting the maximum light influence and safe routine operation is that the UV laser induces damage to fused silica optics. The most effective mitigation protocol of the damaged optics is the CO2 laser processing that leads to make locally melt or evaporate the damage. While the mitigated damage sites possess particular morphology, which may modulate the passing laser beam and induce the downstream intensification that will ruin the neighbor optics. In this work, the morphology features of the mitigated damage pits of fused silica optics are systematically investigated. According to the measured morphology features, a 3D grid model of mitigated pit is built, and the downstream light intensity distribution of the mitigated pit model under incident 351 nm laser is studied by scalar diffraction theory and fast fourier transform (FFT) methods. Results indicate that there are two kinds of downstream intensification: off-axis and on-axis intensifications. In the former intensification, the maximum intensity is located near the output surface of the optics and comes mainly from the depth of the mitigated pit; it increases with the depth. In the alter intensification, the maximum intensity is located far from the output surface of the optics and is mainly dependent on the height of the rim structure at the fringe of the mitigated damage pit; so it increase with increasing height. In addition, it is found that the location of the maximum off-axis or on-axis intensity can approach the output surface of the optics with increasing maximum intensity. For comparison, experimental measurements of downstream intensification induced by the mitigated pits are carried out, and the experimental results are almost consistent with the numerical simulation, implying the validity of the numerical simulation of the mitigated pit model. Results of this research indicate that the downstream intensification of mitigated pits can be suppressed by controlling the morphology features of mitigated pits. this is significant for the development and improvement of the mitigated techniques of damage optics.

Development of Integrated Multi-Station System to Precisely Detect and Mitigate Surface Damage on Fused Silica Optics

Traceless Mitigation of Laser Damage Precursors on a Fused Silica Surface by Combining Reactive Ion Beam Etching with Dynamic Chemical Etching

Combined Etching Technology for Controlling Surface Damage Precursors to Improve Laser Damage Resistance of Fused Silica

Non-destructive evaluation of UV pulse laser-induced damage performance of fused silica optics

Detailed Subsurface Damage Measurement And Efficient Damage-Free Fabrication Of Fused Silica Optics Assisted By Ion Beam Sputtering

Morphology evolution mechanisms and localized structural modification of repaired sites on fused silica optics processed by CO2 laser rapid ablation mitigation

Investigation on Hybrid Laser Ablation and Its Application in Fused Silica Damage Mitigation.

Advanced Mitigation Process (AMP) for Improving Laser Damage Threshold of Fused Silica Optics

Material migration and damage characteristics of fused silica optical surface treated by CO 2 laser/short – pulse ultraviolet laser

Experimental and Theoretical Investigation of Localized CO2 Laser Interaction with Fused Silica During the Process of Surface Damage Mitigation

Repair of Fused Silica Damage Using Selective Femtosecond Laser-Induced Etching

Mitigation Procedure for Damage on the Surface of Fused Silica Using a CO2 Laser Beam

Incident Laser Modulation of a Repaired Damage Site with a Rim in Fused Silica Rear Subsurface

Study of Downstream Light Intensity Modulation Induced by Mitigated Damage Pits of Fused Silica Using Numerical Simulation and Experimental Measurements

Study on the Absorption Characteristics and Laser Damage Properties of Fused Silica Optics under Flexible Polishing and Shallow DCE Process

Microsecond-pulsed CO2 laser cleaning of high damage threshold fused silica

Detection of surface defects and subsurface defects of polished optics with multisensor image fusion

Analysis and Experimental Investigation of Laser Induced Damage of Optics

Optical Modulation of Repaired Damage Site on Fused Silica Produced by CO2 Laser Rapid Ablation Mitigation

Experimental investigation and numerical simulation of defect elimination by CO2 laser raster scanning on fused silica

Investigation on the influence of the CO2 laser parameters on the defect healing process of fused silica