Abstract:Flange wrinkling is one of the most common defects affecting the forming quality of workpieces in conventional spinning. To this end, the flange wrinkling mechanism is analyzed and a new robust theoretical prediction model for the flange wrinkling is developed in this work. It is found that the initiation of flange wrinkling is closely related to the excessive circumferential compressive stress in the zone affected by the roller action rather than the whole flange. Then, a theoretical model for the critical circumferential stress producing flange wrinkling is developed based on the generalized variational principle of limit analysis. By comparing the instant maximum circumferential stress in the zone affected by the roller action with the calculated critical stress, the flange wrinkling can be predicted. Compared with the prediction model based on energy method, the main improvements of the new model can be summarized as follows. First of all, the incremental displacement amplitude of deflection mode in the effective compressive region, which dramatically affects the critical stress but overlooked in the model based on energy method, is considered in the new model. Secondly, the sheet blank is regarded as a rigid plastic material in the new model, so the calculation of elastoplastic matrix which is very sensitive to the mechanical states does not need to be considered, thereby avoiding the adverse effect of the extraction deviation of mechanical states on prediction accuracy. Thus, compared with the prediction model based on energy method, the new model has higher prediction accuracy and better robustness under the extraction deviation of mechanical states. In addition to realizing the prediction of flange wrinkling, the new model can also be used to analyze the influence of sheet blank geometric parameters and material parameters on the initiation of flange wrinkling under various forming conditions. In view of this, the new model is applied to reveal the influence of material parameters (material strengthening coefficient K, hardening index n and elastic modulus E) on the initiation of flange wrinkling by combining response surface methodology and central composite design (CCD). The results show that K has the greatest influence on the initiation of flange wrinkling, followed by E and n. Considering the interaction between the parameters, the interaction between K and E also has a greater effect on the initiation of flange wrinkling. The smaller E and larger K are helpful to reduce the risk of flange wrinkling. Changing the value of n has no significant effect on delaying the occurrence of flange wrinkling. The results can deepen the understanding on the prediction and rules of flange wrinkling in conventional spinning.

The Study of Central Cracking Mechanism and Criterion in Cross Wedge Rolling

Investigation and prediction of central cracking in cross wedge rolling

Microstructural effects on central crack formation in hot cross-wedge-rolled high-strength steel parts

Analysis and experimental studies of internal voids in multi-wedge cross wedge rolling stepped shaft

Influence of Cooling Condition of Tools on Central Deformation of Workpiece and Tool Wear in Cross Wedge Rolling

Novel evaluation method for metal workability during cross wedge rolling process

Influence of tool parameters on central deformation in two-wedge two-roll cross-wedge rolling

Advances in Spinning of Aluminum Alloy Large-sized Thin-walled and Special-curved Surface Head

A Multi-scale Modelling by Coupling Cellular Automata with Finite Element Method and Its Application on Cross-Wedge Rolling

Investigation on the formation of central damage in cross wedge rolling of GH4169 alloy

Finite Element Method Analysis of Micro Cross Wedge Rolling of Metals

A novel method for ball forming by cross wedge rolling

Numerical and experimental research on warm cross wedge rolling of hollow shafts with corrugated surface

Investigation on the inner hole spiral-groove of cross wedge rolling of hollow shafts with mandrel

A New Robust Theoretical Prediction Model for Flange Wrinkling in Conventional Spinning

Prediction of Microstructure and Ductile Damage of A High-Speed Railway Axle Steel During Cross Wedge Rolling

Feasibility Analysis of Cross Wedge Rolling (CWR) of Hexahedral Billet

Numerical and experimental analysis of defects control in cross wedge rolling for titanium alloy workpieces

The Application of Finite Element Method for Analysis of Cross-Wedge Rolling Processes-A Review

Internal defects control mechanism and process optimization of TC11 titanium alloy by cross wedge rolling

Three-dimensional rigid–plastic finite element simulation for the two-roll cross-wedge rolling process