Abstract:The optimization of pore structure for metal foam is a feasible method for reducing the pressure drop and improving the overall heat transfer performance, especially at high velocity. In this regard, the optimized Kelvin cell with elliptical skeletons with a cross-section ratio of the long axis to the short axis (b/a) of 1.0, 1.4, and 2.0 are considered to evaluate the effects of b/a on the pressure drop and the heat transfer coefficient (HTC). The results indicate that both the pressure drop and HTC decrease with an increase in b/a. However, the pressure drop reduces more significantly. For instance, as b/a increases from 1.0 to 2.0, the pressure drop and the volumetric HTC at 90 m/s decrease by 98.5% and 6.3%, respectively. Therefore, the value of the volumetric area goodness factor (which considers both the effect of heat transfer coefficient and pressure drop on the overall heat transfer performance) j(v)/fof the sample with b/a = 2.0 is 86.7% higher than the sample with b/a = 1.0 at 90 m/s. As the velocity increases, the effect of b/a on the overall heat transfer performance increases. Compared with the cylindrical skeleton velocity distribution and pressure drop, the elliptical skeletons lead to a more uniform velocity distribution and reduce pressure drop significantly; nevertheless, the temperature distributions barely change. Moreover, the elliptical skeleton increases the specific surface area. Therefore, the j(v)/fof the elliptical skeleton significantly improves. This study provides a new direction for the design of novel metal foams with excellent overall heat transfer performance for heat transfer devices. (C) 2020 Elsevier Ltd. All rights reserved.

Simulation of Forced Convective Heat Transfer in Kelvin Cells with Optimized Skeletons

Forced convective heat transfer in optimized kelvin cells to enhance overall performance

Air-side Performance of Open-Cell Metal Foams for Use in Dehumidifying Heat Exchangers

The investigation of anisotropic kelvin cells: Forced convective heat transfer

Forced Convection Heat Transfer: A Comparison Between Open-Cell Metal Foams and Additive Manufactured Kelvin Cells

Thermal and hydraulic behaviours of Kelvin cells from metallic three-dimensional printing

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

Study on Enhanced Heat Transfer Performance of Open-Cell Metal Foams Based on a Hexahedron Model

Comparison of forced convective heat transfer between pillar and real foam structure under high Reynolds number

Simulation and Analytical Validation of Forced Convection Inside Open Cell Metal Foams

Pore-scale Simulation of Forced Convection Heat Transfer under Turbulent Conditions in Open-Cell Metal Foam

Numerical Simulation on Thermal Properties of Closed-Cell Metal Foams with Different Cell Size Distributions and Cell Shapes

Forced convective heat transfer performance of foam-like structures – comparison of the Weaire-Phelan and the Kelvin structures with real metal foam

Unlocking the Thermal Efficiency of Irregular Open-Cell Metal Foams: A Computational Exploration of Flow Dynamics and Heat Transfer Phenomena

Modelling on Thermal Transport in Cellular Metal Foams

Enhanced Convective Heat Transfer In High Porosity Metal Foams

Pore-scale Simulation of Forced Convection Heat Transfer in Metal Foams with Uniform and Gradient Structures

Pore-scale numerical investigation on comprehensive heat transfer performance of homogeneous and graded metal foam heat sinks based on tetrakaidecahedron cell

Performance Evaluation on the Gradient Design of Pore Parameters for Metal Foam and Pin Fin-Metal Foam Hybrid Structure

Geometric Optimization of 2d Cellular Metals Cooled by Forced Convection Subjected to Fixed Pumping Power, Pressure Drop or Mass Flowrate

Numerical Simulation on Enhanced Heat Transfer of Metal Foam Based on LBM