Effects of operating parameters for low-grade heat driven thermo-electrochemical cells based on orthogonal experiments
Zhi Li,Gao Qian,Zhenyu Shen,Yanyu Shen,Yuqi Huang,Ruicheng Jiang,Rui Huang,Xiaoli Yu
DOI: https://doi.org/10.1016/j.applthermaleng.2024.122664
IF: 6.4
2024-02-11
Applied Thermal Engineering
Abstract:As a cutting-edge heat-to-power technology based on electrochemical redox reactions, thermo-electrochemical cells, also named as thermocells, are gaining increasing attentions around the world due to their high Seebeck coefficient and scalability. However, the effects of key operating parameters as well as their interactions on the output performance are not fully investigated in a given thermocell system, without providing theoretical guidance for further design and optimization of thermocells. In view of these challenges, this study established a benchmark test rig of a thermocell using platinum electrodes and potassium ferri/ferrocyanide electrolytes. Based on the test bench, the effects of various operating parameters including the electrolyte concentration, electrode orientation and electrode distance are experimentally analysed under a given temperature difference across the hot and cold electrodes. Furthermore, the orthogonal experiments are designed and performed to evaluate the interaction effects of the above operating parameters on the output performance of the thermocell. The single-factor experimental results indicate that higher electrolyte concentration leads to larger Seebeck coefficient but lower power density, while an optimal electrode orientation exists to succeed the largest Seebeck coefficient and the maximum power density within the range of 0 ∼ 180°. In detail, the maximum power density at electrode orientation 135° can attain 0.217 W/m 2 , which is 734 % higher than that of electrode orientation 0°. Besides, the results of orthogonal experiments demonstrate that the order of the relative importance to the Seebeck coefficient and power density is electrode orientation > electrolyte concentration > electrode distance, and the weight of the electrode orientation and the electrolyte concentration is much higher than that of the electrode distance. It is also found that the interaction effects between any two operating parameters are very minor on the output performance of thermocells.
energy & fuels,engineering, mechanical,thermodynamics,mechanics