Abstract:Tube arrangement largely determines the flow structure as well as aero-thermal performance in finned tube heat exchangers (FTHXs). Most of the previous studies did not cover both overall performance and local thermal flow characteristics due to the physical complexity. This work is related to the comparison of various aero-thermal behaviors of rectangular finned elliptical tube heat exchangers (RFETHXs) with different tube arrangements in a turbulent flow region, from basic characteristics to optimal structures. Using 3-D numerical simulation based on the validated standard k-epsilon model, the local thermal flow characteristic as well as overall dimensional and dimensionless performances of three arrangements is investigated. Then, using variance analysis, the contribution of each structural parameter of the three arrangements on overall performance is compared after the screening of the factor of longitudinal tube pitch. Using the same CFD data as variance analysis, an elliptical basis function (EBF) model of each type of arrangements is constructed to understand the distribution of j/j(0.5) as well as PEC in the parameter range of this work. Moreover, optimal structural parameters of each arrangement are provided. It is observed that, each tube arrangement presents its own characteristic of flow separation and heat transfer coefficient distribution on fins. For the in-line and staggered row arrangements, the contributions of all the main factors and the two-way interactions on various overall performances are close, while the situation of the staggered column is different. The influence of two-way interactions is marginal in the staggered column structure, while it cannot be neglected in the two other arrangements in most cases. For j/j(0.5), the optimal structural parameter combination of the in-line and staggered row arrangements is fin thickness 0.6 mm, fin pitch 2 mm and transverse tube pitch 54 mm, whereas that of the staggered column arrangement is 0.6 mm, 2 mm and 70 mm in turn. (C) 2019 Elsevier Ltd. All rights reserved.

Forced convective heat transfer in optimized kelvin cells to enhance overall performance

Simulation of Forced Convective Heat Transfer in Kelvin Cells with Optimized Skeletons

The investigation of anisotropic kelvin cells: Forced convective heat transfer

Thermal and hydraulic behaviours of Kelvin cells from metallic three-dimensional printing

Forced Convection Heat Transfer: A Comparison Between Open-Cell Metal Foams and Additive Manufactured Kelvin Cells

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

Comparison of forced convective heat transfer between pillar and real foam structure under high Reynolds number

CFD Study of the Thermal Performance Improvement of a Counter-Flow Heat Exchanger Using Enhanced Surface Tubes

Forced convective heat transfer performance of foam-like structures – comparison of the Weaire-Phelan and the Kelvin structures with real metal foam

Numerical Study on Heat Transfer Efficiency and Inter-Layer Stress of Microchannel Heat Sinks with Different Geometries

Topology Optimization of Turbulent Flow Cooling Structures Based on the k-ε Model

Numerical Investigation and Optimization of Cooling Flow Field Design for Proton Exchange Membrane Fuel Cell

Enhancing heat transfer efficiency in corrugated tube heat exchangers: A comprehensive approach through structural optimization and field synergy analysis

Heat Transfer Performance and Structural Optimization of a Novel Micro-channel Heat Sink

Experimental and numerical investigation of porous heat exchangers with Kelvin cell structured foam at high temperatures: Coupled conduction-convection and radiation heat transfer

Numerical investigation and optimization of flat plate transpiration-film combined cooling structure

Aero-thermal Behavior and Performance Optimization of Rectangular Finned Elliptical Heat Exchangers with Different Tube Arrangements

Numerical investigation on thermal-hydraulic performance of variable cross section printed circuit heat exchanger

Pore-scale Simulation of Forced Convection Heat Transfer under Turbulent Conditions in Open-Cell Metal Foam

Enhancement mechanism on heat and mass transfer of tall fin with cycloid thermosyphon loop

Influence of cell size and its gradient on thermo-hydraulic characteristics of triply periodic minimal surface heat exchangers