Abstract:Reverse engineering technology has been widely recognized as a crucial strategy for innovative design of products. However, currently one of major problems for its application is that huge amounts of digitized points cloud data need to be processed for geometrical surface modelling, especially for unknown free-form surfaces which are widely used in industry fields such as aircraft, automobile, shipbuilding, steam turbine, etc. In order to digitize unknown free-form surfaces accurately and efficiently, an adaptive sampling approach based on advanced path detecting has been presented. The method is characterized by integrating one touch- trigger probe and two laser probes onto the same Z axis of Coordinate Measuring Machine (CMM), and the two laser probes are located on both sides of the touch probe. During sampling, the CMM scans the free-form surface line by line. At the scanning direction, the laser probes are applied to collect the measuring path information in front of the touch probe. And the data acquired by the laser probes is processed and fitted into B-spline curves real-timely, and then the curvature feature of the measuring path is extracted. The obtained path information is used to generate a new measuring path for touch probe to achieve adaptive sampling. While at the cross-section feeding direction, curvature analysis algorithm based on the angle variation between measuring sections is employed to subdivide the cross-sections when needed. Repeating this procedure, the measuring sections will be distributed adaptively. Simulation and experiment results indicate that the sampling points generated by the touch probe are laid out rationally according to the curvature of the surfaces, therefore the sampling efficiency and accuracy can be improved significantly by the proposed approach.

Scanning Strategy of Deviation-Boundary Prediction Based on Probe Dynamics

Divisionally Analytical Reconstruction of the Magnetic Field Around an Electromagnetic Velocity Probe

Analytical Calculation of the Measuring Error of an Electromagnetic Velocity Probe Caused by a Side Channel Wall

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

Probe’s Auto-alignment in Curved Components Ultrasonic Survey

Error Correction Of Laser Scanning System For Reverse Engineering

Dynamic Error Modeling and Compensation of a Scanning Probe on CMM

Non-contact adaptive sampling for unknown free-form surface based on double-probe integration

A Novel Method for Analyzing the Influence of Relative Attitude of Laser Profile Scanner on 3D Measurement System

Dynamic Compensation Strategy for Scanning Error of Contact Probe Based on Damping Ratio and Frequency Mapping

An Adaptive Sampling Approach for Digitizing Unknown Free-form Surfaces Based on Advanced Path Detecting

Dynamic Confocal Optical Probe Based on Time Difference Measurement

Digitalization of Unknown Free-Form Surface Based on Variable-Direction Point Laser Sensor

Geometric Analysis of Measurement Errors in a Surface Metrology Class with Closed-Loop Probes

A New Centering Method of the Measuring Probe for Spiral Scanning-Based Surface Profile Measurement Systems

Design of Optimal Fast Scanning Trajectory for the Mechanical Scanner of Measurement Instruments

Dynamic errors analysis of CMM touch trigger probes

Embedded displacement measuring device based on error separating technique of multi-circle overlapping three-probe method

A novel dynamic compensation method for a contact probe based on Bayesian inversion

Efficient Calibration of a Scanning Probe on CMM

Research on New Software Compensation Method of Static and Quasi-Static Errors for Precision Motion Controller