Abstract:Predictive analysis of the life of an electronic package requires a sequence of processes involving: (i) development of a finite element (FE) model, (ii) correlation of the FE model using experimental data, and (iii) development of a local model using the correlated FE model. The life of the critical components is obtained from the local model and is usually compared to the experimental results. Although the specifics of such analyses are available in the literature, a comparison among them and against the same electronic package with different user printed circuit board (PCB) thicknesses does not exist. This study addresses the issues raised during the design phase/life analysis, by considering a particular package with a variable geometric thickness of the user PCB. In this paper, the effect of stiffening the user PCB on the fatigue life of a ball grid array (BGA), SAC305 solder joint is studied. The board stiffness was varied by changing the thickness of the PCB, while the size of the substrate, chips, and solder balls were kept constant. The test vehicle consisted of BGA chips soldered to a user PCB. The thickness of the user PCB was varied, but the surface area of the BGA chip remained identical. The test vehicle was then modeled using a finite element analysis tool (ANSYS). Using a global/local modeling approach, the modal parameters in the simulations were correlated with experimental data. The first resonance frequency dwell test was carried out in ANSYS, and the high-cycle fatigue life was estimated using the stress-life approach. Following the simulation, the test vehicle was subjected to resonance fatigue testing by exciting at the first mode resonance frequency, the mode with the most severe solder joint failure. The resistance of the solder joint during the experiment was monitored using a daisy-chain circuit, and the point of failure was further confirmed using the destructive evaluation technique. Both the experimental and simulation results showed that stiffening the board will significantly increase the fatigue life of the solder joint. Although the amplitude of the acceleration response of the test vehicle will be higher due to board stiffening, the increase in natural frequencies will significantly reduce the amplitude of relative displacement between the PCB and the substrate.

Device Architecture Optimization of Solder Ball Joints Fatigue Lifetime under Random Vibration Frequencies

Actuality and Development of Fatigue Models of Solder Joints in Micro-Electronic Packaging

Vibration fatigue experiments of SMT solder joint

SMT solder joint's semi-experimental fatigue model

Fatigue life prediction of BGA solder joint of several alloy compositions under an isothermal harmonic vibration

Survey on Fatigue Life Prediction of BGA Solder Joints

Optimization of the Boundary Conditions of a Board Level Reliability Test Board to Maximize the Fatigue Life of Ball Grid Array Solder Joints under Thermal Cycling and Random Vibration

Random Vibration Reliability of BGA Lead-Free Solder Joint

Fatigue Life Prediction for Cbga under Random Vibration Loading by Finite Element Method

Effect of Stiffening the Printed Circuit Board in the Fatigue Life of the Solder Joint

Fatigue Life Prediction of a Board-Level Assembly for Random Vibrations

Random Fatigue Semi - Experimental Model of SMT Solder Joint in Random Vibration Condition

Simulation Study on Thermo-Fatigue Failure Behavior of Solder Joints in Package-On-Package Structure

Experimental and finite element analysis on determining the fatigue life of pb-free solder joint (Sn-0.5Cu-3Bi-1Ag) used in electronic packages under harmonic loads

Lifetime Analysis of Lead-Free Ball Grid Array Solder Joints under Random Vibration

Coupling effects of mechanical vibrations and thermal cycling on reliability of CCGA solder joints

Reliability Optimisation and Lifetime Modelling of micro-BGA Assemblies in Harsh Environment Applications

Reliability Study on Thermal Cycling of QFP Device Solder Joints Based on Morphological Optimisation

Thermo-Mechanical Reliability of Micro-joints in a RF Packaging with Through Glass Via (TGV) Interposer

Random Vibration Fatigue Life Prediction of Nano-Silver Solder Joint

Comparative study of machine learning method and response surface methodology in BGA solder joint parameter optimization