Abstract:While the use of a Zn interlayer has been demonstrated to reduce the temperature required for joining easily oxidized metal alloys in atmospheric environments, the effects of reactions between the titanium alloy work pieces and the Zn interlayer on the mechanical performance of the finished joints are poorly understood. The present work addresses this issue by evaluating the chemical compositions at the interfaces of pre-galvanized Ti6Al-4 V alloys joined at 420 ? in an atmospheric environment by ultrasonic-assisted brazing, and relating the observed compositions to the mechanical performances of the joints. The Ti-6Al-4 V alloy workpieces are first wetted by pure Zn using an ultrasonic assisted hot dip galvanizing (U-HDG). The obtained ultrasonic excitations are demonstrated to destroy the oxide film on the surfaces of the Ti-6Al-4 V workpieces and promote reactions between Ti and Zn at the interfaces. The plating of Zn on the workpiece surfaces is demonstrated to be realized by the formation of intermetallic compounds (IMCs) comprising a uniform TiZn3 layer in contact with the Ti-6Al-4 V surface, followed by a mixed TiZn3 + TiZn16 layer and a 1-Zn layer at the outer surface. Application of the ultrasonic-assisted brazing process is demonstrated to maintain uniform TiZn3 layers next to the Ti-6Al-4 V surfaces, while the concentration of the TiZn16 phase near the midpoint of the joints increases with increasing ultrasonic treatment time (UST) from 5 s to 20 s, and the corresponding concentration of the 1-Zn phase decreases. The results of mechanical testing demonstrate that the shear strength of the joint obtained with a TiZn3 layer thickness of 8-12 mu m and a UST of 10 s is 210 MPa, which is 3.55 times greater than that obtained for joints processed without pre-galvanization.

Microstructure and Mechanical Performance of AZ31/2024 Dissimilar Alloy Joints Using a Multi-Interlayer of Ni/Al/Zn Via Ultrasonic-Assisted Transient Liquid Phase Bonding

Microstructure and Mechanical Properties of AZ31B/LY12 Joints Using Zn/Ag–Cu–Zn/Zn Multi-Interlayers via Ultrasound-Assisted Transient Liquid Phase Bonding

Joint formation and mechanical properties of ultrasonic-assisted transient liquid bonding of dissimilar Al/Mg with a Zn interlayer in air

Ultrafast ultrasonic-assisted transient liquid bonding Al/Mg in air

Evolution of IMC Layer and Its Reinforcing Effect in 2024/MB8 Dissimilar Joints Using a Multi-Interlayer of Cu/Zn Via U-TLP Bonding

Interfacial structure of the joints between magnesium alloy and mild steel with nickel as interlayer

Joining Mg Alloys with Zn Interlayer by Novel Ultrasonic-Assisted Transient Liquid Phase Bonding Method in Air

Ultrasound-assisted Transient Liquid Phase Bonding of AZ31B Magnesium Alloy Using Al Interlayer

Effect of Zn-brazed-interface on Microstructures and Mechanical Properties of Dissimilar 2A12/AZ31 Alloys Friction Stir Lap Welds

Microstructure Evolution and Mechanical Properties of Ultrasonically TLP Bonded Mg Joint

Microstructure and Mechanical Properties of Magnesium Alloy AZ31B TLP Joints Using Al and Al-12Si Interlayer

Joining mechanism, microstructure, and mechanical properties of AZ31/6061 joint prepared by pouring fusion welding process assisted with Zn-xSn brazing filler

Microstructure and Mechanical Properties of Resistance Spot Welded AZ31/AA5754 Using a Nickel Interlayer

The Effect of a Zinc Interlayer on the Microstructure and Mechanical Properties of a Magnesium Alloy (AZ31)–Aluminum Alloy (6060) Joint Produced by Liquid–Solid Compound Casting

Joining Of Aluminum And Magnesium Via Pre-Roll-Assisted A-Tig Welding With Zn Interlayer

Microstructure and Mechanical Properties of Ni3Al-based Alloy Joint Transient Liquid Phase Bonded Using Ni/Ti Interlayer

Effects of TiZn3 and TiZn16 Components on the Microstructure and Mechanical Performance of Ti-6Al-4 V Alloy Joints Formed Via Ultrasonic Assisted Brazing Using Pre-Galvanized Workpieces.

Interfacial Microstructure and Mechanical Properties of AZ31B/AA7075 Joints Using Non-Equilibrium Thermal Compensation Resistance Welding

Effects of interlayer metal on microstructures and mechanical properties of friction stir lap welded dissimilar joints of magnesium and aluminum alloys

Interfacial Microstructure and Mechanical Properties of Al/Mg Butt Joints Made by MIG Welding Process with Zn-Cd Alloy As Interlayer

Dissimilar Joining of AZ31B Mg Alloy to Ni-coated Ti-6Al-4V by Laser Heat-Conduction Welding Process