Effects of Zr interlayer on microstructure, mechanical property and corrosion behavior of Al/Mg dissimilar friction stir welding lap joints

Yang Zheng,Wei Liu,Zhenyu Su,Zihao Zhao,Guochun Ren,Wei Niu,Zhenyang Yu,Libin Zang,Zhengzhe Yu

DOI: https://doi.org/10.1016/j.matchar.2023.112826

IF: 4.537

2023-03-23

Materials Characterization

Abstract:The microstructure, mechanical property and corrosion behavior of Al/Mg dissimilar friction stir welding (FSW) lap joints with and without Zr interlayer were investigated based on the optimized processing parameters. The macrostructural examination revealed that the processing window for the Al/Mg FSW lap joints was broadened by the Zr interlayer. The microstructural analysis by X-ray diffractometer (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectrometer (EDS) indicated that the Zr interlayer provided more favorable microstructures and elemental distributions to the Al/Mg joint. The alternating band-like stripes in the weld were obviously refined and the detrimental AlMg intermetallic compounds (IMCs) between the base materials were suppressed by the Zr interlayer. The microhardness difference on the cross-section of the Al/Mg joint was decreased to show a more uniform stress distribution state for the Al/Zr/Mg joint. The tensile shear failure strength of the Al/Mg joint was increased by 46.9% from 6.4 N/mm 2 to 9.4 N/mm 2 after the addition of Zr interlayer. The results of electrochemical corrosion and immersion corrosion tests showed that the Al/Mg and Al/Zr/Mg joints presented differentiated corrosion behaviors at representative regions. The weight loss and weight loss rate of the Al/Mg joint in 3.5% NaCl solution was respectively reduced by 18.75% and 19.44% owing to the mitigated corrosion achieved by adding the Zr interlayer.

materials science, multidisciplinary,metallurgy & metallurgical engineering, characterization & testing