Improved strength and ductility on laser beam welded joints of 7085Al matrix nanocomposites by in-situ ZrB 2 nanoparticles and Al 3 (Er, Zr) nanoprecipitates
Xu Gao,Xizhou Kai,Chengchao Du,Kelun Sun,Chuang Guan,Hanfei Zhu,Wei Qian,Yutao Zhao,Luyao Huang
DOI: https://doi.org/10.1016/j.compositesb.2023.110990
IF: 11.322
2023-09-13
Composites Part B Engineering
Abstract:Welding hot cracking, precipitates dissolution and coarsening during welding thermal cycle usually lead to the poor weldability of high-strength 7XXX series aluminum alloy. In this work, in-situ ZrB 2 nanoparticles and Al 3 (Er, Zr) (L1 2 ) nanoprecipitates were used to synergistically optimize microstructure and enhance mechanical property of 7085Al nanocomposites laser beam welded joint (LBWJ). The results showed that ZrB 2 and Al 3 (Er, Zr) could effectively modify dendritic morphology of fusion zone (FZ) and refine grains to 1.78 μm, which was beneficial to relieve welding hot cracking caused by coarse dendritic grains. Besides, ZrB 2 ceramic particle and core-shell Al 3 (Er, Zr) with high thermal stability would significantly compensate the deficiency of η′ and η precipitates during welding thermal cycle. The joint efficiency (JE) of ZrB 2 /7085Al–Er LBWJ reached up to 73.4%. Its ultimate tensile strength (UTS) and elongation were enhanced to 415.3 MPa and 6.8%, increased by 25.4% and 23.6% as compared to the 7085Al LBWJ. Crack deflection and crack bridging induced by ZrB 2 and Al 3 (Er, Zr) contributed to a ductile failure of ZrB 2 /7085Al–Er LBWJ. The synergetic effect of ZrB 2 and Al 3 (Er, Zr) on nucleation and growth of Al grains in FZ was deeply revealed, and the strengthening and toughening mechanisms of ZrB 2 /7085Al–Er LBWJ were discussed in detail.
engineering, multidisciplinary,materials science, composites