Abstract:In order to solve the problems of offset voltage, noise increase and closed-loop gain accuracy degradation caused by high temperature, a low-noise instrument amplifier with high-temperature gain self-calibration technology (HGST) is designed under SMIC 0.18 μ m CMOS process, and a low-noise operational amplifier with low offset voltage and low noise is composed of dual op amps. The op amp adopts a two-stage amplification, three-stage chopper modulation structure, with an operating voltage range of 1.8–2.5 V, a quiescent current consumption of 100 μ A, and a chopper clock frequency of 250 kHz. The simulation results show that the equivalent input noise spectral density at 1 Hz is 57.8 nV/ Hz , the thermal noise is 34.5 nV/ Hz , and the DC offset voltage range is 127.15 μ V. In the case of a 100 °C environment with an ideal output peak value of 127.6 mV, the high-temperature gain self-calibration technology proposed in this paper can increase the peak output voltage of 120.2 mV to 126.0 mV, reduce the voltage error by 5.8 mV, and optimize the temperature coefficient from 535.43 ppm/°C to 86.55 ppm/°C. The simulation results show that the proposed high-temperature gain self-calibration technology can solve the problems of offset voltage, noise increase and closed-loop gain accuracy decrease in high-temperature environment. This means that the instrument amplifier can be used as one of the important components of the geophone in high-temperature environments such as deep well detection.

A Low Power Temperature-Compensated Common-Mode Voltage Detector for Dynamic Amplifiers.

An Untrimmed BJT-Based Temperature Sensor with Dynamic Current-Gain Compensation in 55-Nm CMOS Process

A 1.2V Self-Referenced Temperature Sensor with a Time-Domain Readout and a Two-Step Improvement on Output Dynamic Range

An Energy-Efficient BJT-Based Temperature Sensor with +/- 0.8 degrees C (3 sigma) Inaccuracy from-50 to 150 degrees C

A Dynamic-Biased Resistor-Based CMOS Temperature Sensor with a Duty-Cycle-Modulated Output

On-chip variable gain temperature compensation amplifier

A Capacitively-Degenerated High-Linearity Dynamic Amplifier Using a Real-Time Gain Detection Technique

Integrated Cmos Amplifier With Offset Rejection Scheme For Sensor Application

A New Cmos Current Reference with High Order Temperature Compensation

Design of Low-Offset Low-Power CMOS Amplifier for Biosensor Application

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

Current Reference with Temperature Compensation for Low Power Applications

An Adaptive Analog Temperature Compensated W-Band Front-End with ±0.0033 Db/°c Gain Variation Across −30 °C to 120 °C

Design of Low Voltage Bandgap Reference Sources with Temperature Compensation but Without Operational Amplifier

A Wideband CMOS Variable Gain Amplifier withTemperature Compensation

A Low Noise High Speed Dynamic Comparator Insensitive to PVT and Common-mode Input

A Low Power Class-AB Audio Power Amplifier With Dynamic Transconductance Compensation in 55 nm CMOS Process.

Design of a high temperature resistant instrument amplifier using high temperature gain self-calibration technology

A Low-Power Self-Calibration Digital-Output CMOS Temperature Sensor with ±0.1°C Inaccuracy from −40°C to 85°C

A 1.16-V 5.8-to-13.5-ppm/°C Curvature-Compensated CMOS Bandgap Reference Circuit With a Shared Offset-Cancellation Method for Internal Amplifiers

Dynamic Offset Compensated Operational Amplifiers