Abstract:Phased arrays have demonstrated great potential in 5/6G communication, radar and sensor applications [1– 4]. To achieve excellent performance, phased arrays require low-noise and high-linearity front-ends [5]. Most importantly, arrays demand uniform performance from all elements for optimum receiving G/T value and transmission effective isotropic radiated power (EIRP) [6]. Figure 14.7.1 exemplifies it with an array whose antenna element has 3dBi uniform gain on one side and no radiation on the other side. When all elements in an $8 \\times 1$ linear array with a $\\lambda/2$ space have identical characteristics, the array presents a 19dBi gain in the normal direction. Any temperature change in the array can be decomposed into an absolute temperature change superposed with a relative temperature variation. When the absolute temperature increases, the frontend gain decreases by as much as $-0.1dB/^{\\circ}C$ [1]. When there is non-uniform solar radiation or heat generation inside the array, the relative temperature variation may present a gradient or a parabolic distribution. Taking a $64 \\times1$ array as an example, when there is a gain/phase mismatch with an average value of $0.125dB/1.25^{\\circ}$ between adjacent elements in a parabolic distribution locating at the center of the array, the formed beam presents a 1.4dBi main-lobe reduction in the normal direction and an 11.9dBi side-lobe degradation, shown in Fig. 14.7.1. It also shows an active array receiver front-end highlighting all the temperature-sensitive blocks. Calibration can adjust temperature-dependent performances [7]. However, periodic calibration inevitably takes time overhead and prevents array systems from full-time operations. Digital background calibration allows systems to operate uninterrupted, but may induce antenna boresight instability due to abrupt gain/phase change. In contrast, analog background calibration like adaptive healing design can resolve the above issues [8]. In this paper, we present an adaptive analog temperature healing receiver front-end with ± $0.005 dB/^{\\circ}C$ gain variation from -15 to $85^{\\circ}C$ environment temperature for a 17.7-to-19.2GHz phased array.

An Adaptive Analog Temperature Compensated W-Band Front-End with ±0.0033 Db/°c Gain Variation Across −30 °C to 120 °C

A 17.7–19.2-Ghz Receiver Front End with an Adaptive Analog Temperature- Compensation Scheme

On-chip variable gain temperature compensation amplifier

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

An Adaptive Analog Temperature-Healing Low-Power 17.7-to-19.2GHz RX Front-End with 0.005dB/C Gain Variation, <1.6dB NF Variation, and <2.2dB IP<sub>1dB</sub> Variation across-15 to 85C for Phased-Array Receiver

A Wideband BiCMOS Thermal Noise Canceling Low Noise Amplifier with Temperature Compensation

A 100–117 GHz W-Band CMOS Power Amplifier With On-Chip Adaptive Biasing

An Energy-Efficient BJT-Based Temperature Sensor with +/- 0.8 degrees C (3 sigma) Inaccuracy from-50 to 150 degrees C

A Wideband BiCMOS Variable Gain Amplifier with Novel Continuous Db-Linear Gain Control and Temperature Compensation

14.7 An Adaptive Analog Temperature-Healing Low-Power 17.7-to-19.2GHz RX Front-End with ±0.005dB/°C Gain Variation, <1.6dB NF Variation, and <2.2dB IP1dB Variation across -15 to 85°C for Phased-Array Receiver.

A Wideband Db-Linear VGA with Temperature Compensation and Active Load

A CMOS 135–150 GHz 0.4 dBm EIRP transmitter with 5.1dB P1dB extension using IF envelope feed-forward gain compensation

A 60–90 GHz Mixer-First Receiver with Adaptive Temperature-Compensation Technique

A BJT-Based CMOS Temperature Sensor with Duty-Cycle-Modulated Output and ±0.5°C (3σ) Inaccuracy from −40 °C to 125 °C

A 32-Element 25.8-to-30.8 GHz Phased-Array CMOS Transmitter with Programable Piecewise Linear Temperature-Compensation Technique Achieving ±0.002 Db/°c Gain Variation Across −60-to-85 °C

A Wideband CMOS Variable Gain Amplifier withTemperature Compensation

A2.1-ppm/°C Current-Mode CMOS Bandgap Reference with Piecewise Curvature Compensation.

A Compact V-Band Temperature Compensation Low-Noise Amplifier in a 130 nm SiGe BiCMOS Process

A 1.16-V 5.8-to-13.5-ppm/°C Curvature-Compensated CMOS Bandgap Reference Circuit With a Shared Offset-Cancellation Method for Internal Amplifiers

A New Cmos Current Reference with High Order Temperature Compensation

A High-Order Compensated Op-amp-less Bandgap Reference with 39 ppm/ °C over -260~125 °C Temperature Range and -50 dB PSRR