Abstract:Viscoelastic properties of thermo-set composites using an epoxy matrix reinforced with pristine CNT and silane-modified MWCNT at different concentrations (0%, 1%, 2% and 4%) were studied to observe the enhanced thermal and mechanical properties supplemented by the increased interfacial interaction due to CNT modification. The composite with pristine CNT was labeled as EPB-CNT, whereas that with silane-modified carbon nanotubes (CNTs) was referred to as ECB-CNT. The silanes used were glycidyloxypropyltrimethoxysilane (GPTS) and 3-aminopropyltriethoxysilane (APTES). Diglycidyl ether of bisphenol-A (DGEBA) was completely cured by Jeffamine D-400 to prepare EJ-0. The amine groups of the 3-aminopropyltriethoxysilane (APTS) partially cured the diglycidyl ether of bisphenol-A (DGEBA) in EAJ-0 by a sequential polymerization process, while the methoxy groups subsequently produced a silica network through the sol–gel method. Subsequently, Jeffamine D-400 was used as a curing agent at elevated temperatures for cross-linking and complete curing. EJ-0 and EAJ-0 were considered as neat films of EPB-CNT and ECB-CNT composites, respectively. Tensile and storage modulus tests, thermal property analysis using TGA, and microstructure characterization using field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), and TEM were all part of the study. Comparing composites with varying percentages and with neat films, the chemically bonded epoxy-silanized MWCNTs (ECB-CNTs) showed improved performance. ECB-CNT 4% had the highest tensile and storage modulus as well as improved thermal stability. Improved filler material distribution and fewer voids were found through microstructure analysis, strengthening the link between the reinforcement and matrix. The results underscore the potential applications of the CNT-enhanced nanocomposites in the engineering fields of automotive, aerospace, radar-absorbing materials and others. This marks a significant development in the field of composite technology to produce durable and effective materials.

Multi-walled Carbon Nanotubes Enhanced the Property of Epoxy Asphalt Composite

Multi-Walled Carbon Nanotubes Enhanced the Performance of Epoxy Asphalt Pavement Binder.

Reducing Dispersity of Mechanical Properties of Carbon Fiber/epoxy Composites by Introducing Multi-Walled Carbon Nanotubes

Length-dependent Electrical and Thermal Properties of Carbon Nanotube-Loaded Epoxy Nanocomposites

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Analysis of the Storage Stability Property of Carbon Nanotube/Recycled Polyethylene-Modified Asphalt Using Molecular Dynamics Simulations

Enhanced thermomechanical properties of epoxy-multiwalled CNT nano-composites

Surface Modification of Multiwalled Carbon Nanotube on the Performance of SBS Asphalt

Study on the interfacial contact behavior of carbon nanotubes and asphalt binders and adhesion energy of modified asphalt on aggregate surface by using molecular dynamics simulation

Exploiting the synergetic effects of graphene and carbon nanotubes on the mechanical properties of bitumen composites

Curing behavior and mechanical properties of an eco-friendly cold-mixed epoxy asphalt

Reinforcement of Aminopropyl-Terminated Siloxane-Treated Carbon Nanotubes in Epoxy Thermosets: Mechanical and Thermal Properties

Preparation of flame retardant and conductive epoxy resin composites by incorporating functionalized multi‐walled carbon nanotubes and graphite sheets

Carbon Nanomaterials for Enhancing the Thermal, Physical and Rheological Properties of Asphalt Binders

Synergistic hybrid effect of nano fillers on the structure and properties of asphalt composites

Carbon Nanotube/Epoxy Composites Fabricated by Resin Transfer Molding

Amino-functionalized Carbon Nanotubes/polyphosphazene Hybrids for Improving the Fire Safety and Mechanical Properties of Epoxy

Multiscale interfacial enhancement of surface grown carbon nanotubes carbon fiber composites

Enhancing performance and fuel resistance of modified epoxy asphalt using amine and carboxyl terminated PET co-hardener

Improvement Effect of Functionalized Cnts on Mechanical and Thermal Properties of Epoxy Matrix

Synergistic toughen epoxy resin by incorporation of polyetherimide and amino groups grafted MWCNTs