Abstract:To expand the application range of modified asphalt and mixtures and effectively reduce the aggregation of nanomaterials in asphalt, nanocarbon/styrene butadiene styrene (SBS)/rubber powder composite-modified asphalt is proposed. This paper presents a laboratory study on the performance of nanocarbon/copolymer SBS/rubber powder composite-modified asphalt, and nanocarbon particles modified by titanate coupling agents as modifiers are selected. The nanocarbon/copolymer SBS/rubber powder composite-modified asphalt was prepared by a high-speed shearing method. The physical properties and rheological performance were assessed using ductility tests, softening point tests, penetration tests, dynamic shear rheometer (DSR) tests, and bending beam rheometer (BBR) tests. Furthermore, the mixture properties, including the high-temperature stability, low-temperature cracking resistance, moisture stability, and freeze-thaw splitting, were evaluated in the laboratory. The micromorphology of the base asphalt and composite-modified asphalt was examined by scanning electron microscopy (SEM), and the reactions between the modifiers and AH-70 base asphalt were studied by Fourier transform infrared spectroscopy (FTIR). The results reveal that the surface-modified nanocarbon and rubber powder additives substantially increased the softening point and penetration index of the base asphalt, with little obvious influence on the low-temperature performance. In addition, when nanocarbon/copolymer SBS/rubber powder composite-modified asphalt was used, the high-temperature stability and low-temperature cracking resistance of the nanocarbon/copolymer SBS/rubber powder composite-modified asphalt mixture were approximately 1.3 times those of the nanocarbon/rubber powder asphalt mixture. In terms of the micromorphology and reaction, the addition of the nanocarbon can increase the compatibility between the base asphalt and rubber powder, and then the addition of copolymer SBS can improve the structure of nanocarbon (after surface modification)/rubber powder-modified asphalt to form a stable network. Moreover, the physical reaction plays the dominant role in the modification process for the rubber powder and base asphalt, and chemical reactions occur in the modification process for the surface-modified nanocarbon and base asphalt.

Synergistic hybrid effect of nano fillers on the structure and properties of asphalt composites

Multi-Walled Carbon Nanotubes Enhanced the Performance of Epoxy Asphalt Pavement Binder.

Investigation of the Effects of Nano-Al2o3 Addition on Compatibility, Rutting and Fatigue Properties of Styrene-Butadiene-rubber Modified Asphalt

Multi-walled Carbon Nanotubes Enhanced the Property of Epoxy Asphalt Composite

Evaluation of the Composite Mechanism of Nano-Fe2O3/Asphalt Based on Molecular Simulation and Experiments

Research on the Influence of Nanocarbon/Copolymer SBS/Rubber Powder Composite Modification on the Properties of Asphalt and Mixtures

Study on the Performance of Nano-Zinc Oxide/Basalt Fiber Composite Modified Asphalt and Mixture

Exploiting the synergetic effects of graphene and carbon nanotubes on the mechanical properties of bitumen composites

Influence of Carbon Nanotubes on Morphology of Asphalts Modified with Styrene–Butadiene–Styrene

Synergistic effects of CNTs/SiO2 composite fillers on mechanical properties of cement composites

Surface Modification of Multiwalled Carbon Nanotube on the Performance of SBS Asphalt

Micromorphology of Asphalt Modified by Polymer and Carbon Nanotubes Through Molecular Dynamics Simulation and Experiments: Role of Strengthened Interfacial Interactions

Research on the synergistic modification effect and the interface mechanism of GO/SBS compound-modified asphalt based on experiments and molecular simulations

Carbon Nanomaterials for Enhancing the Thermal, Physical and Rheological Properties of Asphalt Binders

Revealing the Thermodynamic Characteristics, Bonding Behavior, and Failure Patterns of the Asphalt-Aggregate Interface Containing SBS/CNT Micronanoparticles at the Molecular Scale

Effect of multi-walled carbon nanotubes on the performance of styrene–butadiene–styrene copolymer modified asphalt

Preparation and Properties of Carbon Nanofiber Modified Emulsified Asphalt Based on Ultrasonication and Surfactant and the Impact of SBR and NH4Cl

Revealing compatibility mechanism of nanosilica in asphalt through molecular dynamics simulation

Effects of different carriers for zinc oxide (ZnO) particles on microstructure of ZnO/layered silicate composite and aging resistance of composite modified asphalt

Influence of Nano-Al2O3 on the Evolution of Molecular Weight, Morphology, and Rheology of SBS-Modified Asphalt

Performance Evaluation of Bitumen with a Homogeneous Dispersion of Carbon Nanotubes