Abstract:A novel enhancement-mode (E-mode) high electron mobility transistor (HEMT) with three-dimensional electron gas (3DEG) and three-dimensional hole gas (3DHG) is presented. It features a GaN-top layer, a positive graded AlGaN barrier layer (GAL), and a negative graded AlGaN back barrier layer (GABL) (wherein the positive/negative doping gradient is defined with respect to the growth direction), with a vertical conduction channel aside a MIS trench gate. The 2DHG is formed at the interface between the GaN-top layer and GAL. The 3DEG and 3DHG are formed due to the polarization induced by linearly grading Aluminum (Al) composition from 0 to x(Al) in GAL and 0.4 to 0 in GABL, respectively. The source and drain locate at the same side of the MIS trench gate, and the source contacts with the gate. Firstly, 2DHG blocks the electron current conduction path between the source and 3DEG so as to achieve E-mode. Secondly, the high-sheet density 3DEG in GAL greatly increases the on-state current. Thirdly, the leakage current effectively is reduced by the 3DHG in GABL, improving the breakdown voltage. Fourthly, a high breakdown voltage (BV) is obtained because the polarization junction formed by the polarization charges in GAL and GABL improves the electric field distribution in the drift region. The BV of the proposed HEMT increases to 1080 V from 47 V of the conventional MIS HEMT at the same length of the drift region, and specific on-resistance (R-on,(sp)) decreases to 0.29 m Omega cm(2) from 0.64 m Omega cm(2) in simulation.

Simulation Design of a High-Breakdown-voltage P-Gan-gate GaN HEMT with a Hybrid AlGaN Buffer Layer for Power Electronics Applications

A Novel AlGaN/Si3N4 Compound Buffer Layer HEMT with Improved Breakdown Performances

High-performance normally off p-GaN gate high-electron-mobility transistor with In 0.17 Al 0.83 N barrier layer design

Study on a p-GaN HEMT with composite passivation and composite barrier layers

High-performance normally off p-GaN gate high-electron-mobility transistor with In0.17Al0.83N barrier layer design

Novel High-Energy-Efficiency AlGaN/GaN HEMT with High Gate and Multi-Recessed Buffer

An AlGaN-GaN HEMT with p-GaN Extended Gate for Improvements on Current Dispersion and Breakdown Characteristics

Simulation and analysis of enhancement-mode AlGaN/GaN HEMT with P-I-N junction gate

An AlGaN/GaN HEMT with a reduced surface electric field and an improved breakdown voltage

Breakdown voltage improvement of enhancement mode AlGaN/GaN HEMT by a novel step-etched GaN buffer structure

Breakdown enhancement and hot electrons mitigation for p-GaN gate HEMTs by electric field modulation

High-performance Normally off AlGaN/GaN High Electron Mobility Transistor with P-Type H-Bn Cap Layer

Study of Normally-Off AlGaN/GaN HEMT with Microfield Plate for Improvement of Breakdown Voltage

A Normally-off P-Gate AlGaN/GaN HEMT for High Power Application

High-current-density high-voltage normally-off AlGaN/GaN hybrid-gate HEMT with low on-resistance

Hybrid High-Power AlGaN/CdZnO/GaN/AlGaN HEMT with High Breakdown Voltage

Novel High Voltage RESURF Al GaN/GaN HEMT with Charged Buffer Layer

An improved design for e-mode AlGaN/GaN HEMT with gate stack β-Ga2O3/p-GaN structure

Simulation Study of the Use of AlGaN/GaN Ultra-Thin-Barrier HEMTs with Hybrid Gates for Achieving a Wide Threshold Voltage Modulation Range

An Algan/Gan Hemt with Enhanced Breakdown and A Near-Zero Breakdown Voltage Temperature Coefficient

High Performance Enhancement-Mode HEMT with 3DEG to Conduct Current and 3DHG As Back Barrier