Abstract:The external piping system which connects power devices, valve control devices, actuators, etc. is an essential system on the aero engine. Under the combined effects of high fluid pressure and external vibration, multiaxial fatigue failure is the main factor that seriously affects the safety of the piping system. The objective of this paper is to establish the multiaxial fatigue life model for the typical welded fuel pipe of the piping system by combining fatigue testing, simulation and theoretical analysis which is of great guiding significance for the engineering application of the piping system. Firstly, the fatigue limits of welded fuel pipes under no and 13.5 MPa internal pressure are obtained by rotational bending fatigue tests using the up-and-down method. Three additional stress levels of rotational bending fatigue tests under no internal pressure are supplemented and then the S-N curve is further obtained by the group method. Since the corresponding fracture surface of the specimens locates at the weld toe near the fixed end, peak stress method is adopted to evaluate the fatigue performance of the weld toe on the pipe specimens. In addition, by comparing the fatigue limit with no and 13.5 MPa internal pressured pipes, it is obvious that the equivalent uniaxial stress corrected by Gerber formula is not applicable for the multiaxial fatigue condition which is caused by the combined effect of fluid pressure and displacement load. The local stress concentration factor caused by the weld toe is determined and based on Findley critical plane model, the multiaxial fatigue life model is established which simultaneously takes the local stress concentration effect, mean stress effect and multiaxial stress effect into consideration. The results of rotational bending fatigue tests under 13.5 MPa internal pressure are within the triple error dispersion band and the accuracy of the proposed life model are verified.

Multiaxial Fatigue Life Prediction of Tubular K-joints Using an Alternative Structural Stress Approach

Structural stress approach for multiaxial fatigue life estimation of welded structures

A multi-axial fatigue-oriented strategy for fatigue damage monitoring and assessment of tubular joints

Prediction of Stress Distribution along the Intersection of Tubular T-Joints by A Novel Structural Stress Approach

Fatigue Analysis on a Multi-planer Tubular KK Joints Based on Scalded Model Test

Multiaxial Fatigue Life Prediction Based on Damage Mechanics and Critical Plane Method

Fatigue Performance Testing and Life Prediction of Welded Fuel Pipes

Predicting fatigue crack initiation life in typical joints of offshore observation tower structures

Multiaxial fatigue analysis of the stress joint for a deepwater steel catenary riser

Numerical Investigation on the Fatigue Behavior of the Multi-Planar Tubular DX-Joint under Combined Loads

Numerical Study on Fatigue Behavior of Tubular Joints for Signal Support Structures

Selection Methodology of High-Cycle Fatigue Analysis Approach for Damage Estimation in Welded Structural Joints

Experimental study on the fatigue failure mechanism of key joints in deepwater semi-submersible platform structures

Analysis and Calculation of Fatigue Life of Unconventional Tubular Joints

A novel structural stress approach for multiaxial fatigue strength assessment of welded joints

A Fatigue Life Prediction Approach for Resistance Spot Welded Joints with Consideration of the Stress Ratio Effect

Multiaxial Fatigue Life Prediction Based on Nonlinear Continuum Damage Mechanics and Critical Plane Method

Characterization of Fatigue Crack Growth Behavior in Welded Tubular T-joint

Numerical Analysis of Low Cycle Fatigue for Welded Joints Considering Welding Residual Stress and Plastic Damage under Combined Bending and Local Compressive Loads

Stress Concentration Factors Of Tubular Kk-Joints Under Balanced Axial Loading

Fatigue Tests and Design of Q460 CHS-CHS T-joints under Axial Loading and In-Plane Bending