Abstract:A novel fully welded concrete-filled integral K-joint incorporating longitudinal perfobond ribs welded to the inner faces of the chord is proposed to improve the fatigue behavior. To evaluate the stress concentration factor (SCF) of such joints, a 1:5 scale truss specimen was fabricated and tested to measure the SCF distribution in the fatigue prone joint. A finite element model was also developed to evaluate the SC Fmax of concrete-filled welded integral K-joints and was validated against the test results. A parametric study was carried out and a comprehensive database was obtained considering the effects of brace width-to-chord thickness ratio (2 γ ), brace-to-chord thickness ratio ( τ ), the angle between braces and chord ( θ ) on the SC Fmax . Also, the following three basic loading conditions were examined: brace axial force, chord axial force and chord in-plane bending. Based on the results of 192 numerical models, new equations to predict the SC Fmax of concrete-filled welded integral K-joint were derived for design purposes. Finally, the fatigue behavior of three different designs is compared in terms of SC Fmax and hot spot stress range Sh - N curves. These systems are rectangular hollow section (RHS) K-joints, concrete-filled rectangular hollow section (CFRHS) K-joints and concrete-filled welded integral K-joint. It was shown that the concrete-filled integral welded K-joint has the best fatigue behavior, followed by the CFRHS K-joint, while the RHS K-joint has the poorest fatigue behavior.

Numerical Investigation on the Fatigue Behavior of the Multi-Planar Tubular DX-Joint under Combined Loads

Prediction of Stress Concentration Factor Distribution for Multi-Planar Tubular DT-joints under Axial Loads

Numerical Study on Fatigue Behavior of Tubular Joints for Signal Support Structures

Fatigue Analysis on a Multi-planer Tubular KK Joints Based on Scalded Model Test

Hot Spot Stress Approach For Fatigue Life Assessment In Welded Bridge Connections Using Monitoring Data And Fem Analysis

Numerical Analysis and Punching Shear Fracture Based Design of Longitudinal Plate to Concrete-Filled CHS Connections

STRUCTURAL STRESS METHOD FOR FATIGUE DESIGN OF CONCRETE FILLED STEEL TUBULAR T-JOINTS UNDER AXIAL LOADING

Experimental investigation of SCF distribution for thin-walled concrete-filled CHS joints under axial tension loading

Experiment investigations of stress concentration factor of concrete-filled tubular T joints

Stress influence matrix on hot spot stress analysis for welded tubular joint in offshore jacket structure

Empirical modeling of stress concentration factors using finite element analysis and artificial neural networks for the fatigue design of tubular KT‐joints under combined loading

Fatigue tests of multiplanar concrete-filled steel tubular KK-joints with inner ring stiffeners

Experimental and numerical investigations on stress concentration factors of concrete filled steel tube X-joints

An Insight into the Creep-Fatigue Damage Localization in Welded Joints Based on Crystal Plasticity Finite Element Method

Experimental and Numerical Characterization of Low Cycle Fatigue and Creep Fatigue Behaviour of P92 Steel Welded Joint

Scf Distribution Of Concrete-Filled Chs T- And Y- Joints Under Axial Tension

Experimental study on the fatigue failure mechanism of key joints in deepwater semi-submersible platform structures

Investigation on Fatigue Behaviour of Load-Carrying Fillet Welded Joints Based on Mix-Mode Crack Propagation Analysis

Experimental and numerical analyses on stress concentration factors of concrete-filled welded integral K-joints in steel truss bridges

On the interaction of axial and bending loads in the weld root fatigue strength assessment of load-carrying cruciform joints

3D finite element analysis and optimization of welding residual stress in the girth joints of X80 steel pipeline