Fatigue Life Evaluation of Tripod Offshore Structure Using 3D Fatigue FE Analysis
Shazia Muzaffer,Kyong-Ho Chang,Wang-Sub Shin
DOI: https://doi.org/10.1007/s13296-022-00600-7
2022-04-11
International Journal of Steel Structures
Abstract:Offshore wind power became an important source of renewable energy that is rapidly growing over the past several years. Large offshore wind turbines require strong and large support structures. The support substructures are exposed to diverse dynamic and static loads such as waves, snow, wind ice, earthquakes, and tides. These unstable, destructive repeated loads lead to material degradation or damage accumulation which in turn leads to the failure of offshore structures. Fatigue is considered one of the significant modes of failure in offshore structures. The constant exposure of welded multiplanar tubular joints of tripod structure under cyclic loading or the presence of flaws due to fabrication and construction induces high-stress concentration at these joints. The material degradation or damage accumulation at welded joints gives rise to the formation or propagation of cracks, and ultimately leads to a collapse of giant steel structures. This research aimed at investigating the origin of crack positions and fatigue life in tripod offshore structures. The 3-D fatigue FE analysis was carried out in two steps, Firstly, the welding deformation and welding residual stress were calculated in thermal and mechanical analysis. Secondly, 3D fatigue crack analysis based on cyclic hysteresis constitutive equation and fatigue damage theory was used to calculate the fatigue life and crack initiation in tripod offshores structure. Results obtained from the analysis were compared with the results from hot-spot stress method and Eurocode 3. From the results, it was considered that 3D-fatigue FEM is a useful method to estimate fatigue life and crack initiation.