Abstract:Nanometer measurement has become more and more important in the development of metrology, material science, microelectronics and biology. Heterodyne Fabry-Parot interferometer can be used in the nonlinear error calibration with an accuracy of nanometer and sub-nanometer order. We can get very high resolution by using heterodyne Fabry-Parot interferometer frequency locking technique in theory. However, the measure uncertainty and the stability of results are worse than the expectation's. In this paper, in order to solve the problems of air refrective index change and temperature excursion, we designed the vacuum system that adjusts the interference light path and built it based on NIM's heterodyne Fabry-Parot interferometer. The key in our design is to reduce the thermic balance time and to ensure reliable hermetization of movable components. The influnce of the change of air refractive index to the measured precision was studied, and the approximate formula of vacuum degree that the system requires was concluded. It has been proved in the experiment that the system works steadily. The system's ability of anti-jamming has been improved, and the demand of the measure surroundings has been lowered. Comparing with capacitance displacement measurement instrument, we conclude that the nonlinear degree of this system in the range of 0.35um, which is longer than half of the wavelength of the laser, is better than 3.9nm.

A Real-Time Nonlinear Error Measurement Method with Picometer Accuracy and Free from Target Motion State

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

A Novel Method to Simultaneously Measure the Straightness

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

Four Degree-Of-Freedom Geometric Error Measurement System with Common-Path Compensation for Laser Beam Drift

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

Simultaneous Measuring Method Of Linear Guide Geometric Errors In Four-Degrees Of Freedom

Laser heterodyne interference signal processing system based on AD8302

Investigation of Heterodyne Interferometer Technique for Dynamic Angle Measurement: Error Analysis and Performance Evaluation

Note: Periodic Error Measurement In Heterodyne Interferometers Using A Subpicometer Accuracy Fabry-Perot Interferometer

Highly precise nonlinear error calibrating system based on Fabry-Perot interferometer - art. no. 68342X

Real-Time Correction of Nonlinearity Error in Homodyne Phase-Locking Interferometer

The study on nonlinear error calibrating system based on Fabry-Parot interferometer with an accuracy of nanometer order

Periodic Error Characterization in Commercial Heterodyne Interferometer Using an External Cavity Diode Laser Based Fabry-Perot Interferometer

Experimental study on the error caused by phase distortion of heterodyne signal process system for nanometrology

Method for Suppressing Periodic Nonlinear Errors Caused by High-Order Optical Crosstalk in High-Subdivision Homodyne Interferometer

Research on Measurement of On-Line Laster Coaxality Error for Rotary Parts

Multi-Axis Laser Interferometer Not Affected by Installation Errors Based on Nonlinear Computation

Development of low-cost heterodyne interferometer with virtual electronic phasemeter

Equivalent Measurement and Real-Time Compensation of Error Caused by Intensity Change in Deep Sub-Nanometer Displacement Measuring Interferometry