Abstract:Under the demand of distributed power sources, solid oxide fuel cell (SOFC) has attracted considerable interest for its high efficiency. However, non-carbon neutral and CO poisoning limit the applications of SOFC when converting hydrocarbons to hydrogen-rich gas by thermally incorporating an external/internal processor. In this work, an external reformer and SOFC system is established to improve hydrogen production therefore enhancing power density by CO preferential oxidation and CO2 sorption-enhanced methods. The prepared CoxMgyCa(1-x-y)Oz sorbents are observed to provide porous structures, and Co0.110Mg0.204Ca0.686Oz presents the most uniform pore size distribution and the highest CO2 sorption capacity by lowering the CO2 sorption activation energy via kinetic analysis. By using the mixture of Ni/Al2O3–SiC catalyst and the synthesized CoxMgyCa(1-x-y)Oz sorbents, sorption-enhanced hydrogen production from propane partial oxidation is achieved for a higher hydrogen production and lower CO, CO2 productions. The produced hydrogen is served as a fuel of the proposed SOFC system, and a maximum output power density of 513 mW/cm2 at 1.2 A/cm2 is reached, which is equivalent to 160 mL/min of pure H2. This work might offer a novel insight for developing low-cost processes towards indirect hydrogen production for fuel cells.

Propane Fueled Solid Oxide Fuel Cells

Operation of Anode-Supported Solid Oxide Fuel Cells on Propane–air Fuel Mixtures

An ammonia fuelled SOFC with a BaCe0.9Nd0.1O3-δ thin electrolyte prepared with a suspension spray

Advance in Portable Solid Oxide Fuel Cells Operating on Propane

80 Hours operation of a tubular solid oxide fuel cell using propane/air

Use of A Catalyst Layer for Propane Partial Oxidation in Solid Oxide Fuel Cells

Sorption-enhanced propane partial oxidation hydrogen production for solid oxide fuel cell (SOFC) applications

A High-Performance No-Chamber Fuel Cell Operated on Ethanol Flame

Direct liquid methanol-fueled solid oxide fuel cell

Enhancing hydrogen production from propane partial oxidation via CO preferential oxidation and CO2 sorption towards solid oxide fuel cell (SOFC) applications

Direct Operation of Solid Oxide Fuel Cells with Methane Fuel

Solid Oxide Fuel Cells Operated by Internal Partial Oxidation Reforming of Iso-Octane

A robust direct-propane solid oxide fuel cell with hierarchically oriented full ceramic anode consisting with in-situ exsolved metallic nano-catalysts

Proton-conducting Solid Oxide Fuel Cells Prepared by a Single Step Co-Firing Process

Performance of Anode-Supported Single-Chamber Solid Oxide Fuel Cells

Direct Operation of Solid Oxide Fuel Cells on Low-Concentration Oxygen-Bearing Coal-Bed Methane with High Stability

Co-generation of liquid chemicals and electricity over Co-Fe alloy/perovskite anode catalyst in a propane fueled solid oxide fuel cell

Direct Flame SOFCs with La[sub 0.75]sr[sub 0.25]cr[sub 0.5]mn[sub 0.5]o[sub 3−δ]∕ni Coimpregnated Yttria-Stabilized Zirconia Anodes Operated on Liquefied Petroleum Gas Flame

Membrane-assisted Propane Partial Oxidation for Solid Oxide Fuel Cell Applications

Propane-fuelled microtubular solid oxide fuel cell stack electrically connected by an anodic rectangular window

Operation of ceria-electrolyte solid oxide fuel cells on iso-octane–air fuel mixtures