Abstract:A series of ceria-based composite materials consisting of samaria doped ceria (SDC) and binary carbonates(Li2CO3–Na2CO3) were examined as functional electrolytes for low-temperature solid oxide fuel cells (SOFCs). DTA and SEM techniques were applied to characterize the phase- and micro-structural properties of the composite materials. Conductivity measurements were carried on the composite electrolytes with a.c. impedance in air. A transition of ionic conductivity with temperature was occurred among all samples with different carbonate content, which related to the interface phase. Single cells based on the composite electrolytes, NiO as anode and lithiated NiO as cathode, were fabricated by a simple dry-pressing process and tested at 400–600°C. The maximum output power at 600°C increased with the carbonate content in the composite electrolytes, and reached the maximum at 25wt.%, then decreased. Similar trend has also shown at 500°C, but the maximum was obtained at 20wt.%. The best performances of 1085mWcm−2 at 600°C and 690mWcm−2 at 500°C were achieved for the composite electrolytes containing 25 and 20wt.% carbonates, respectively. During fuel cell operation, it found that the SDC-carbonate composites are co-ionic (O2−/H+) conductors. At lower carbonate contents, both oxide–ion and proton conductions were significant, when the content increased to 20–35wt.%, proton conduction dominated. The detailed conduction mechanism in these composites needs further investigation.

R&D for Low Temperature (300 to 600°C) SOFCs

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Development of Solid Oxide Fuel Cell Materials for Intermediate-to-low Temperature Operation

Nanocomposite Electrode Materials for Low Temperature Solid Oxide Fuel Cells Using the Ceria-Carbonate Composite Electrolytes

The composite electrolyte materials for low-temperature solid oxide fuel cell

Development of Novel Low-Temperature SOFCs with Co-Ionic Conducting SDC-carbonate Composite Electrolytes

Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating below 500 °C

Electrolyte material progress of low-temperature SOFC

La<SUB>0.3</SUB>Sr<SUB>0.2</SUB>Mn<SUB>0.1</SUB>Zn<SUB>0.4</SUB> Oxide-Sm<SUB>0.2</SUB>Ce<SUB>0.8</SUB>O<SUB>1.9</SUB> (LSMZ-SDC) Nanocomposite Cathode for Low Temperature SOFCs

High performance low temperature solid oxide fuel cells with novel electrode architecture

Solid‐Oxide Fuel Cells: Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating Below 500 °C (Adv. Mater. 48/2017)

Superionic Conductivity in Ceria-Based Heterostructure Composites for Low-Temperature Solid Oxide Fuel Cells

Fabrication and Characterization of Composite Electrolyte for Intermediate-Temperature SOFC

Improved Ionic Transport Using a Novel Semiconductor Co0.6Mn0.4Fe0.4Al1.6O4 and Its Heterostructure with Zinc Oxide for Electrolyte Membrane in LT-CFCs

High-Performance Low-Temperature Solid Oxide Fuel Cell with a Pt@C–Ni 0.8 Co 0.15 Al 0.05 LiO 2−δ Composite Cathode

High-performance Solid Oxide Fuel Cells with Fiber-Based Cathodes for Low-Temperature Operation

Scaffold Infiltrated Cathodes for Low-Temperature Solid Oxide Fuel Cells

A mini review of the recent progress of electrode materials for low-temperature solid oxide fuel cells

Novel Advanced Solid Oxide Fuel Cells Based On Ceria-Halide Salt Composite Electrolytes

A novel yttrium stabilized zirconia and ceria composite electrolyte lowering solid oxide fuel cells working temperature to 400 °C

Spin-coating derived solid oxide fuel cells operated at temperatures of 500 °c and below