Abstract:The concept of grain boundary engineering (GBE) has been proposed based on the fact that many studies have demonstrated that boundaries associated with low Sigma-value coincident site lattice (CSL) misorientations show higher resistance to intergranular fracture and corrosion, reduced susceptibility to impurity segregation and superior ductility. It is commonly accepted that for fcc metals of low to medium stacking fault energy metals, including Ni and many Ni-alloys, the most important CSL boundary for the GBE process is a Sigma 3 boundary, the occurrence of which is dominated by the formation of annealing twins. Moreover, it has been found that repetitive thermo-mechanical processing can be used to increase further the fraction of Sigma 3 (and Sigma 3(n) (n >1)) boundaries. However, the mechanism for this is not yet clear. Therefore, an investigation on the evolution of Sigma 3 boundaries during recrystallization is important for understanding the mechanisms of GBE for those materials. In the present paper the evolution of Sigma 3 boundaries during recrystallization in a 96% cold-rolled sample of pure nickel of 99.996% purity has been explored using orientation maps obtained using electron backscatter diffraction (EBSD). Each orientation map was taken from the same area after annealing for various times. Based on the EBSD data the Sigma 3 boundaries can be divided into two groups: "twin" type and "non-twin" type. These groups can be differentiated using a parameter of deviation angle (Delta theta) of boundary misorientation to the ideal twin misorientation (60 degrees < 111 >). During recrystallization incoherent twin boundaries are found to develop from coherent twin boundaries. It is also that most Sigma 3(n) (n >1) boundaries are formed by impringement of a nucleus with its n-order twins, and that the chance for such impingement events decreases significantly with increasing n. Most non-twin type Sigma 3 boundaries arise from impingement of Sigma 1 and twin type Sigma 3 boundaries. Non-twin type Sigma 3 boundaries may be more effective than twin type Sigma 3 boundaries to develop a beneficial grain boundary network.

Orientations of Nuclei During Static Recrystallization in a Cold-Rolled Mg-Zn-Gd Alloy

Oriented Nucleation Causing Unusual Texture Transition During Static Recrystallization Annealing in Cold-Rolled Mg–Zn–Gd Alloys

Study on the Evolution Pattern of Grain Orientation and Misorientation During the Static Recrystallization of Cold-Rolled Mg-Zn-Gd Alloy

Quasi-in-situ Observing Unusual Grain Orientation Rotation During the Process of Static Recrystallization Grain Growth in Mg-Zn-Gd Alloy

The Preferential Growth and Related Textural Evolution During Static Recrystallization in a Cold-Rolled Mg–Zn–Gd Alloy

Orientations of Recrystallization Nuclei Developed in Columnar-Grained Ni at Triple Junctions and a High-Angle Grain Boundary

Oriented Growth During Recrystallization Revisited in Three Dimensions

Quasi-in-situ Observations of Low-Angle Grain Boundaries, Twins and Texture Evolution During Continuous Annealing in a Cold-Rolled Mg-Zn-Gd Alloy

Recovery and Recrystallization as a Function of Deformed Microstructure Orientation in Coarse Grained Cold-Rolled Ni

Orientation Effects on the Tensile Properties of Single Crystal Nickel with Nanovoid: Atomistic Simulation

Texture Evolution During Static Recrystallization of Cold-Rolled Magnesium Alloys

Twinning-Assisted Static Recrystallization and Texture Evolution in A Mg-Gd-Y-Zr Alloy

Orientations of Recrystallization Nuclei Developed in Columnar-Grained Ni at Triple Junctions

On the role of selective nucleation and growth to recrystallization texture development in a Mg-Gd-Zn alloy

Orientation-Dependent Characteristics for Residual Grains During Hot Deformation of Nickel-Based Alloy 925

Dynamic Recrystallization Mechanisms During Hot Compression of Mg–Gd–Y–Nd–Zr Alloy

An In-Situ Study of Static Recrystallization in Mg Using High Temperature EBSD

In-situ observations of static recrystallization and texture formation in a cold-rolled CoCrFeMnNi high entropy alloy

Unusual Twin Induced Recrystallization and Corresponding Texture Optimization in a Cold Rolled Mg-Gd-Zr Alloy During Annealing

Evolution of Sigma 3 Boundaries During Recrystallization of Cold-Rolled Nickel Deformed to High Strain

Origin of Recrystallized Cubic Orientation Grains in Face-Centered Cubic Metals