Abstract:In order to achieve desired mechanical properties of alloys by manipulating grain boundaries (GBs) via solute decoration, it is of great significance to understand the underlying mechanisms of microstructural evolution and plastic deformation. In this work, nanocrystalline (NC) Cu-W alloyed films with W concentrations spanning from 0 to 40 at% were prepared by using magnetron sputtering. Thermal stability (within the temperature range of 200 °C-600 °C) and hardness of the films were investigated by using the x-ray diffraction, transmission electron microscope (TEM) and nanoindentation, respectively. The NC pure Cu film exhibited substantial grain growth upon all annealing temperatures. The Cu-W alloyed films, however, displayed distinct microstructural evolution that depended not only on the W concentration but also on the annealing temperature. At a low temperature of 200 °C, all the Cu-W alloyed films were highly stable, with unconspicuous change in grain sizes. At high temperatures of 400 °C and 600 °C, the microstructural evolution was greatly controlled by the W concentrations. The Cu-W films with low W concentration manifested abnormal grain growth (AGG), while the ones with high W concentrations showed phase separation. TEM observations unveiled that the AGG in the Cu-W alloyed thin films was rationalized by GB migration. Nanoindentation results showed that, although the hardness of both the as-deposited and annealed Cu-W alloyed thin films monotonically increased with W concentrations, a transition from annealing hardening to annealing softening was interestingly observed at the critical W addition of ∼25 at%. It was further revealed that an enhanced GB segregation associated with detwinning was responsible for the annealing hardening, while a reduced solid solution hardening for the annealing softening.

Phase Analysis of Nano-Sized Particles in As-Forged W-1%La2o3 Alloy

Microstructure Analysis of a W-1%La2O3 Alloy

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Formation of Amorphous Phase in an Extruded 93W-7(Ni/fe/co) Alloy

Effects of doping route on microstructure and mechanical properties of W−1.0wt.%La2O3 alloys

Microstructural stability, phase evolution and mechanical properties of a forged W-modified high-Mn β-γ-TiAl alloy

Studies on thermodynamic and kinetic and phase evolution of W-Ni-Fe powder during mechanical alloying

High-Resolution and Analytic Electron Microscopy Investigations on the Microstructure of A Tial (W, Si) Alloy

Nanoscale Precipitations in Deformed Dilute Alloying Mg-Zn-Gd Alloy

Phase transformation and thermal stability of mechanically alloyed W–Ni–Fe composite materials

Investigation of Precipitation Phases in As-Cast Wedge Ingot of Bulk Amorphous Zr56.6cu17.3ni12.5al9.6ti4 Alloy

The study of constitutional phases in a Ni47Ti44Nb9 shape memory alloy

Synthesis and high mechanical strength of Al-based alloys consisting mainly of nanogranular amorphous particles

Deformation and Phase Transformation of Disordered α Phase in the (α + γ) Two-Phase Region of a High-Nb TiAl Alloy

Phase Transformation and Microstructure Evolution of Differently Processed Ti–45Al–9Nb–Y Alloy

Investigation on Microstructure and Phase Transformation of La Added Ti49.3ni50.7 Shape Memory Alloy

Study on synthesis and structure of mechanically alloyed W-Ni-Fe nanocomposite powders

Formation and Analysis of Amorphous and Nanocrystalline Phases in Al–Cu–Mg Alloy under Friction Stir Processing

An Analysis on Precipitated Phase Particles in Low Carbon Micro-Alloying Dual Phase Steel

Phase, Microstructure and Properties Evolution of Fine-Grained W–Mo–Ni–Fe Alloy During Spark Plasma Sintering

Microstructure Evolution and Mechanical Properties of Ultra-Fine Grain AlCrFe2Ni2Wx High-Entropy Alloys