Abstract:Mixed ionic‐electronic conducting (MIEC) cathode materials are promising for application in intermediate‐temperature solid oxide fuel cell due to their potentially low polarization resistance for oxygen reduction reaction. Sintering is a key step in fabricating MIEC composite cathode to form interconnected networks for gas transport and electron/ion conduction. However, the sintering process of MIEC composite electrodes has rarely been studied and thus not well understood. In this study, an enhanced kinetic Monte Carlo (KMC) model is proposed to study the microstructure evolution of the composite MIEC electrodes. The key microstructural properties such as average particle size, pore size, porosity, tortuosity, effective surface area and effective three‐phase boundary (TPB) length are comprehensively extracted from the reconstructed electrode by a series of the estimation algorithm. A backpropagation artificial neural network (ANN) is established for the quick prediction of micro properties during the sintering process. Besides, a global sensitivity analysis approach based on the elementary effects method is applied to assess the sensitivity degree of structural and operating parameters while Kolmogorov‐Smirnov test is conducted to ensure the reliability of the sampling strategy (P‐value >> .05). By considering the time evolution within the ANN surrogate model, this study firstly explores the coupling parametric effects of the KMC model at different sintering stages. The initial sintering stage (KMC steps <1000) is found to be the dominant section throughout the sintering procedure due to higher initial system free energy. Tortuosity and porosity show the most significant influence on the formation of effective surface and TPB reaction sites. Large tortuosity and small porosity favor the formation of effective surface reaction area but adversely hinder the gas transport at the same time. Free energy and sintering temperature are the determining factors in the sintering process. Even though grain growth and pore migration frequency show almost the same importance, their influence on the different output factors is quite different. This study establishes a qualitative framework to gain an essential perception about how the sintering process influences the micro properties of the electrode thereby efficiently guiding the sintering control and microstructure design. A kinetic Monte Carlo model is established considering sintering kinetics. A BP‐ANN method is proposed for quick prediction of micro‐characteristics An elementary effects approach is employed to perform global sensitivity analysis. Decisive role of initial powder fabrication on the sintering process is emphasized Porosity and tortuosity play the most significant effects than other structural factors. This study establishes a qualitative framework to gain an essential perception about how the sintering influences the micro properties of the electrode thereby efficiently guiding microstructure design. The initial sintering stage is found to be the dominant section throughout the sintering procedure. Tortuosity and porosity show the most significant influence on the formation of effective surface and TPB reaction sites. Large tortuosity and small porosity favor the formation of surface reaction area but adversely hinder gas transport.

Electrochemical Characteristics and Sintering Preparation of MetalHydride Electrode for Air-MH Semi-fuel Cell Applications

Electrochemical evaluation of sintered metal hydride electrodes for electric vehicle applications

Improved electrochemical performance of AB2-type metal hydride electrodes activated by the hot-charging process

Evaluation of the electrochemical capacity of metal hydride electrode using hydrogen storage alloys

Electrochemical Properties of Rare-Earth Based Hydrogen Storage Alloy for Replacing Pt As the Anode Electrocatalyst in AFC

Microstructure and electrochemical properties of amorphous Mg-Fe-Ni hydrogen storage electrode material

The Electrochemical Evaluation of Ball Milled MgNi-based Hydrogen Storage Alloys

An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys

The effects of mechanical grinding on the hydrogen storage properties of MlNi4.7Al0.3 alloy

Microstructures and electrochemical hydrogen storage properties of novel Mg–Al–Ni amorphous composites

Effect of Cathode Fabrication Method on Characteristics of Anode-Supported Tubular Solid Oxide Fuel Cells

Study on Co-Sintering of Hydrogen Electrode and Electrolyte Prepared by Tape Casting for Solid Oxide Electrolysis Cell

Tailoring the microstructure and improving the discharge properties of dilute Mg-Sn-Mn-Ca alloy as anode for Mg-air battery through homogenization prior to extrusion

A Hierarchical Porous Microstructure for Improving Long-Term Stability of Ni1-Xcux/Sdc Anode-Supported It-Sofcs Fueled with Dry Methane

Effects of surface treatment on performances of metal hydride electrodes and Ni/MH batteries

Fabrication of porous polyaniline/MWCNTs coated Co9S8 composite for electrochemical hydrogen storage application

Performance Investigation of a Nickel Cermet Anode Modified with Copper, Alkaline Earth Metal Oxide, Boron, and Perovskite for Direct Methane Fuel Cell

Surface analysis for the hydrogen storage alloy and electrocatalytic activity of MH electrodes

Design of Metal Sulfide Electrode for Hydrogen Production by Electrolysis

Microstructure of hydrogen electrode catalyst layer materials for solid oxide electrolysis cells

Sintering kinetics and microstructure analysis of composite mixed ionic and electronic conducting electrodes