Abstract:Next generation lithium-ion batteries (LIB) with high energy density and high power density have recently become of great interest for electric vehicle and portable devices. With the further upgrade of especially electric vehicles, the next generation LIB with high power and high energy density is urgently required. For this purpose, composite electrode consisting of commercially available graphite active material mixed with silicon nanoparticles is under current development. The main objectives are a significant increase of the practical capacity and energy density of commercial anodes, an overcome of the drawbacks of pure silicon due to large volume changes during electrochemical cycling, and the development of a technology suitable for mass production. In order to reduce the intrinsic mechanical stress of silicon/graphite electrodes and to improve the lithium-ion transport kinetic, free-standing electrode structures were generated by applying ultrafast industrial capable laser material processing. This advanced laser technology is demonstrated to be a flexible and powerful tool for pushing silicon/graphite (Si/C) composite anode materials beyond state of the art electrodes towards application. The electrochemical properties of cells with unstructured and structured electrodes were systematically analyzed by means of cyclic voltammetry, galvanostatic measurements, and electrochemical impedance spectroscopy. The increased active surface enables a significant improvement of lithium-ion diffusion kinetics. Furthermore, it is expected that the increased active surface will also provide additional artificial porosity for active material expansion, which in turn will reduce the mechanical stress within the electrodes during lithiation or delithiation. In this context, in-situ scanning electron microscopy (SEM) was performed in order to analyze the active material volume changes during charging and discharging. A main engineering challenge was to optimize the electrode architecture such as the pitch distance of free-standing structures regarding an enhanced electrochemical performance and a reduced material loss. Furthermore, an alumina (Al2O3) layer with a thickness of 5 nm, which acts as an artificial SEI, was coated on structured silicon/graphite electrodes by applying Atomic Layer Deposition (ALD). Cyclic voltammetry measurements were subsequently performed in order to investigate the fundamental properties of cells with structured and Al2O3- coated silicon/graphite electrodes. Galvanostatic measurements reveal that the cells with structured electrodes exhibit excellent electrochemical properties, i.e., a significantly improved capacity retention. ALD layers can contribute to further improvement of cycle stability and cell lifetime. In addition, advanced full cells with Lithium Nickel Manganese Cobalt Oxide NMC622 as cathode and Si/C as counter electrode were assembled and the electrochemical data will be presented.

Electrochemical evaluation of sintered metal hydride electrodes for electric vehicle applications

Electrochemical Characteristics and Sintering Preparation of MetalHydride Electrode for Air-MH Semi-fuel Cell Applications

Effects of sintering on the performance of hydrogen storage alloy electrode for high-power Ni/MH batteries

Improved electrochemical performance of AB2-type metal hydride electrodes activated by the hot-charging process

Evaluation of the electrochemical capacity of metal hydride electrode using hydrogen storage alloys

The Electrochemical Evaluation of Ball Milled MgNi-based Hydrogen Storage Alloys

An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys

(Invited) Manufacturing and Characterization of Advanced High Energy Silicon/Graphite Electrodes

The effects of mechanical grinding on the hydrogen storage properties of MlNi4.7Al0.3 alloy

Electrochemical Properties of Rare-Earth Based Hydrogen Storage Alloy for Replacing Pt As the Anode Electrocatalyst in AFC

Electrochemical Properties of Ab(5) Type Hydrogen Storage Alloy As Anode Electrocatalyst of Pemfc

A Preparation Method of Electrodes for the Molten Carbonate Fuel Cell

Effects Of Electrode Manufacture On Electrochemical Properties For Hydrogen Storage Alloys

Effect of surface modification on performance of alloy electrodes for hydrogen storage

Investigating the Structure and Performance of Electrodes Made by Dry and Wet Slurry Processes

Effects of surface treatment on performances of metal hydride electrodes and Ni/MH batteries

The Cycling Behaviour of Misch Metal—nickel-Basedmetal Hydride Electrodes and the Effects of Copper Plating on Their Performance

High Energy Density Lithium–Sulfur Batteries: Challenges of Thick Sulfur Cathodes

Characteristics of Hydrogen Storage Alloy Electrode with Cupric Oxide Additive

Stereolithography of 3D Sustainable Metal Electrodes towards High‐Performance Nickel Iron Battery

Design of Metal Sulfide Electrode for Hydrogen Production by Electrolysis