Abstract:Phenolic resin plays a critical role in ablative thermal protection materials. However, its ablation and insulation properties need to be further improved to meet the growing requirements of the entire aerospace industry. In this work, composites are altered with various loadings of mesophase pitch (MP) to make mesophase pitch-modified boron-phenolic resin (BPR) composites (MPBPR). The compressive strengths of carbonized MPBPR composites are significantly improved (optimally by 2.7 times) via this modification, indicating the improved mechanical performance of MPBPR composites under high temperatures. Results reveal that the obtained MPBPR composites show better ablation resistance and thermal insulation performance under oxyacetylene flame. The linear ablation rates (4 MW/m2, lasting for 30 s) of the composites with 10 and 20 wt % MP are reduced by 41.5 and 55.4% compared to that of neat BPR. Meantime, MPBPR composites exhibit lower back-face temperature during the ablation process. Furthermore, results also show that the introduction of MP can effectively avoid the growth of large transversal microcracks, increase the proportion of micropores in the ablated char layer, and simultaneously improve the graphitization of resultant char. Both the microporous and graphitic structures of the residual char contribute to the improved ablation and insulation properties of MPBPR composites. The abovementioned results indicate that these MP-modified boron-phenolic resins are promising materials for application in a thermal protection system.

Ablation Performance and Insulation Property of Carbon/Pheonlic Composites with ZrB2 Particles

Improved Ablation Resistance of Carbon–phenolic Composites by Introducing Zirconium Diboride Particles

The effects of zirconium diboride particles on the ablation performance of carbon-phenolic composites under an oxyacetylene flame

The effects of ZrSi 2 on the ablation and insulation performances of low-density carbon-phenolic composites

Anti-ablation properties of ZrB2 modified carbon/phenolic composites in plasma wind tunnel

Improved Thermal Stabilities, Ablation and Mechanical Properties for Carbon Fibers/Phenolic Resins Laminated Composites Modified by Silicon-containing Polyborazine

Ablation Behavior of a Carbon Fabric Reinforced Phenolic Composite Modified by Surface-Decorated ZrB<sub>2</sub>/SiC

Oxidation and ablation behaviours of ZrC modified carbon/carbon composites

Ablation Behavior of a Carbon Fabric Reinforced Phenolic Composite Modified by Surface-Decorated ZrB2/SiC

Ablation experiments of silica phenolic resin material eroded by highly concentrated particles

Synthesis and Anti-ablation Properties of in Situ ZrC Modified Carbon/Carbon Composites

Effect of Mesophase Pitch Incorporation on the Ablation Behavior and Mechanism of Phenolic Composites

B4C-MODIFIED SiO2-PHENOLIC COMPOSITES FOR ENHANCED ABLATION RESISTANCE

Microstructure and ablation behavior of C/C composites doped with ZrB2

Ablation Behaviour and Mechanical Performance of ZrB2-ZrC-SiC Modified Carbon/carbon Composites Prepared by Vacuum Infiltration Combined with Reactive Melt Infiltration

Ablation and Mechanical Properties of ZrC-reinforced PBI Resin Matrix Composites

Ablation Property and Mechanism of ZrC-Cu-C/C Composites

Ceramicization mechanism and thermal insulation/ablative properties of hollow microspheres/boron phenolic composites

Preparation and ablation properties of ZrB 2 –SiC protective laminae for carbon/carbon composites

Effect of ZrO<SUB>2</SUB> from the Oxidation of ZrC on Ablation of ZrC Modified Carbon/Carbon Composites: Effect of ZrO<SUB>2</SUB> from the Oxidation of ZrC on Ablation of ZrC Modified Carbon/Carbon Composites

Thermal oxidation and compressive failure behavior of ZrSi2–B4C modified phenolic resin-based composite