Abstract:Poly(L‐lactide) (PLLA), poly(D‐lactide) (PDLA) and poly(methyl methacrylate) (PMMA) are melt blending with various content of PDLA (0 and 3 wt%) and PMMA (0–20 wt%). The blending pellets then undergoes the melt spinning and hot drawing process to prepare PLA composite fibers. The hydrolysis resistance of fibers is improved by the addition of PMMA and the mechanical property and heat resistance properties increased for the highly oriented crystalline morphology induced by the stereocomplex crystals (SC), which have formed in PLLA/PDLA/PMMA fibers. The SC nanofibrils are detected from the surface morphology of PLLA/PDLA/PMMA fibers after hydrolysis at 60°C for 132 h in NaOH solution. Polylactic acid/poly(methyl methacrylate) (PLA/PMMA) composite fibers with high performance were fabricated using melt spinning technique. The crystallization, lamellae orientation and physical properties of composite fibers were investigated systematically. The addition of PMMA (0–20 wt%) has improved the hydrolysis resistance of composite fibers by preventing water molecules from penetrating and diffusing through the fibers, but the strength and heat resistance were reduced at the same time. The stereocomplex crystallites (SC) formed before spinning by introducing poly(D‐lactide) (PDLA) (3 wt%) in poly(L‐lactide) (PLLA) matrix and acted as nucleating agents to enhanced the crystallization and lamellae orientation of PLLA matrix, which improved the physical properties of PLA composite fibers resultful. The tensile strength of PLA fibers with 3 wt% PDLA and 5 wt% PMMA was increased 31% as well as the boiling water shrinkage and the hydrolysis rate were decreased 30% and 33% in relation to PLLA fibers. Finally, the hydrolysis resistance was further enhanced on the basis of realizing high strength and heat resistance, which is of great significance for preparing durable PLA fiber materials and expanding their application.

The Synthesis of Poly (lactic Acid)-Fulvic Acid Graft Polymer and Its Effect on the Crystallization and Performance of Poly (lactic Acid)

Crystallization behavior and mechanical properties of bio-based green composites based on poly(L-lactide) and kenaf fiber

Preparation, crystallization and thermo-oxygen degradation kinetics of poly(lactic acid)/fulvic acid-g-poly(isoprene) grafting polymer composites

Manipulation of Non-Isothermal Crystallization Kinetics of Poly(lactic Acid) Composite Film by a Novel Nucleating Agent

Simultaneous Enhancement of Strength and Toughness of PLA Induced by Miscibility Variation with PVA.

Enhanced Crystallization Rate and Mechanical Properties of Poly(l‐lactic Acid) by Stereocomplexation with Four‐armed Poly(ϵ‐caprolactone)‐block‐poly(d‐lactic Acid) Diblock Copolymer

Preparation and Characterization of Polylactic Acid-G-bamboo Fiber Based on In-Situ Solid Phase Polymerization

Study on the Compatible Interface of Bamboo Fiber/polylactic Acid Composites by In-Situ Solid Phase Grafting

Synthesis, Stereocomplex Crystallization and Properties of Poly(l‐lactide)/four‐armed Star Poly(d‐lactide) Functionalized Carbon Nanotubes Nanocomposites

Study on properties of polylactic acid/lemongrass fiber biocomposites prepared by fused deposition modeling

Preparation Of Plasticized Poly (Lactic Acid) And Its Influence On The Properties Of Composite Materials

Toward durable polylactic acid/poly(methyl methacrylate) polyblend fibers with high performance

The synthesis, characterization of opal-poly(methyl methacrylate) graft polymer based on ICAR-ATRP and its effect on performance of poly (lactic acid)

Lifting the quality of fused filament fabrication of polylactic acid based composites

Structure, Performance and Crystallization Behavior of Poly (Lactic Acid)/Humic Acid Amide Composites

Synergistic Effects of Nucleating Agents and Plasticizers on the Crystallization Behavior of Poly(lactic Acid)

The Effect of a Small Amount of Modified Microfibrillated Cellulose and Ethylene–glycidyl Methacrylate Copolymer on the Crystallization Behaviors and Mechanical Properties of Polylactic Acid

Preparation and Characterization of Three-Element Compound Plasticizing Bamboo Fiber-g-Polylactic Acid/Polylactic Acid Composite

Grafting Polymerization of Polylactic Acid on the Surface of Nano‐sio2 and Properties of PLA/PLA‐grafted‐SiO2 Nanocomposites

Enhanced Crystallization of Sustainable Polylactic Acid Composites Incorporating Recycled Industrial Cement

Preparation Of High Performance Biobased Composites From Poly(Lactic Acid) And Microcrystalline Cellulose