Abstract:Initially, the use of Additive Manufacturing (AM) technology is mainly for the production of prototypes of a new invention and design. However, the AM technology had extended to the tooling industry, medical scaffolding, and direct part production. This is due to the extensive research and development carried out around the globe regardless of the material, equipment, and technology of AM. In this study, characterization and properties of PCL/PLA/PEG/Nano-HA polymer composites were investigated. Polycaprolactone (PCL), polylactic acid (PLA), polyethylene glycol (PEG), and nano-hydroxyapatite (n-HA) composites were prepared by melting and compounding the mixture using a Brabender machine. The composition of the materials was determined by previous research that it is the optimum recipe, with the ratio of PCL:PLA is 7:3 while the composition of PEG and nano-HA is 5% per hundred resin each. The temperature of the Brabender machine was set at 160°C, and the speed of the mixer was set at 30 rpm. After the mixing, the composites were characterized by using Fourier Transform Infrared Spectroscopy (FTIR) to determine the spectrum and quality of the composite mixed. Based on the spectrum, it can be verified that the characteristic of n-HA powder had been incorporated well into the PCL/PLA/PEG polymer blend. The thermal properties of the composites were investigated by using Thermogravimetry Analyzer (TGA). The results showed that the addition of n-HA lowered the initial degradation temperature and peak degradation temperature. Apparently, the addition of n- HA did not increase the degradation temperature of the composites. Furthermore, Simulated Body Fluid (SBF) test was carried out to access the bioactivity properties of the composites after the addition of n-HA. The results had proved that the addition of n-HA had triggered the growth of apatite layer on the surface of the samples treated with SBF. The growth of the apatite layer was verified by the X-ray Diffraction pattern, and the results proved the initial assumptions.

Structure, Performance and Crystallization Behavior of Poly (Lactic Acid)/Humic Acid Amide Composites

Poly(L-Lactide)/Layered Double Hydroxides Nanocomposites: Preparation and Crystallization Behavior

Nonisothermal Crystallization Behavior of Biocomposites from Poly(lactic Acid) and Bamboo Fiber

Fractionated Crystallization Kinetics and Polymorphic Homocrystalline Structure of Poly(L-lactic Acid)/poly(d-Lactic Acid) Blends: Effect of Blend Ratio

Competing Stereocomplexation and Homocrystallization of Poly(l-lactic Acid)/poly(d-Lactic Acid) Racemic Mixture: Effects of Miscible Blending with Other Polymers

Blending Effects on Polymorphic Crystallization of Poly(l-lactide)

Manipulation of Non-Isothermal Crystallization Kinetics of Poly(lactic Acid) Composite Film by a Novel Nucleating Agent

Performance, crystallization and rheological behavior of poly(lactic acid)/N-(2-hydroxyl) propyl-3-trimethyl ammonium chitosan chloride intercalated vermiculite grafted poly(acrylamide) nanocomposites

Toward durable polylactic acid/poly(methyl methacrylate) polyblend fibers with high performance

Effect of Poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) on the Crystalline Properties of Poly (L-lactic acid)

Thermal And Crystallinity Property Studies Of Poly (L-Lactic Acid) Blended With Oligomers Of 3-Hydroxybutyrate Or Dendrimers Of Hvdroxyalkanoic Acids

Polymorphic Crystalline Structure and Crystal Morphology of Enantiomeric Poly(Lactic Acid) Blends Tailored by A Self-Assemblable Aryl Amide Nucleator

Comparison of Precipitated Calcium Carbonate/Polylactic Acid and Halloysite/Polylactic Acid Nanocomposites

Characterization, Thermal and Biological Properties of PCL/PLA/PEG/N-HA Composites

Homogeneously Dispersed Composites of Hydroxyapatite Nanorods and Poly(lactic Acid) and Their Mechanical Properties and Crystallization Behavior

Crystal polymorphism of polylactide and its composites by X-ray diffraction study

Thermal and mechanical properties of aminolyzed‐poly(lactic acid) with amine‐terminated dendritic polymer: Surface and bulk functionalization

Enhancing the Non-Isothermal Crystallization Kinetics of Polylactic Acid by Incorporating a Novel Nucleating Agent

Preparation, Structure, And Performance Of Poly(Lactic Acid)/Vermiculite-Poly(Lactic Acid)-Beta-Cyclodextrin Inclusion Complex Nanocomposites

Filling Behavior, Morphology Evolution and Crystallization Behavior of Microinjection Molded Poly(lactic Acid)/hydroxyapatite Nanocomposites

Formation of Stereocomplex Crystal and Its Effect on the Morphology and Property of PDLA/PLLA Blends