Abstract:Dry ice pulsed sublimation spray cooling (PSSCDI) is an innovative, efficient, energy-saving, and fast cooling method for the thermal management of chip-level electronic components with high thermal load in the aerospace field. Aiming at the heat transfer mechanism of dry ice sublimation spray cooling, a heat transfer model of pulsed dry ice sublimation spray cooling based on flow discretization is proposed in this paper. According to the heat transfer mechanism and the formation mechanism of dry ice reflected by the Joule–Thomson effect, the experimental platform of pulsed dry ice sublimation spray cooling was designed and built. The relationship between spray height, spray flow rate, and spray cone Angle was determined by experiments, and the best spray height was determined. The effects of mass flow rate, pulse period, and duty cycle on heat transfer characteristics of pulsed dry ice sublimation spray were investigated experimentally. The experimental results show that the instantaneous temperature change process of simulated heat source under different working conditions can be divided into three stages: heating, cooling, and constant temperature. The heat flux and heat transfer coefficient of pulsed dry ice sublimation spray cooling under high heat load increase with the increase of the duty ratio and mass flow of dry ice spray, but decrease with the increase of pulse period. However, the heat flux of the duty cycle and heat transfer coefficient of the duty cycle decrease with the increase of duty cycle, which indicates that under the premise of considering dry ice consumption, a lower duty cycle will make pulsed dry ice spray cooling have a higher heat transfer efficiency. When the mass flow rate of dry ice spray is 13 g/s, the pulse period is 0.2 s, the duty cycle is 50 %, the heating power is 40W, the relative optimal cooling heat flux is 48 W/cm 2 , and the relative optimal heat transfer coefficient is 5400 W/(m 2 ·K).

Experimental Investigation on the Ice Melting Heat Transfer with a Steam Jet Impingement Method

Numerical Analysis of Heat Transfer Behaviours of Melting Process for Ice Thermal Storage Based on Various Heat Source Configurations

Experimental study on heat transfer of jet impingement with a moving nozzle

Experimental study on the heat transfer of moving double jet impingement during steel quenching

Experimental study of double direct contact ice slurry generator

Effects of Flow Parameters on Thermal Performance of an Inner-Liner Anti-Icing System with Jets Impingement Heat Transfer

HEAT TRANSFER WITH IMPINGING CIRCULAR FREE-SURFACE WATER JET

Investigation on the Jet Impingement/Boiling Heat Transfer

Simulation Investigation of Vertical Ice Layer Melting Characteristics under Forced Convection Heat Transfer

An Experimental Study of Heat Transfer With an Impinging Circular Water Jet

Flow behavior and heat transfer characteristics of liquid film on vertical hot surface by inclined jet impingement

Numerical Investigation on Heat Transfer and Melting Process of Ice with Different Porosities

Confined jet impingement of liquid nitrogen onto different heat transfer surfaces

Comparative Study Of Impinging Jet Array Heat Transfer On A Flat Plate Cooled By Superheated Steam And Air

Numerical Investigation on Thermal Hydraulic Characteristics of Steam Jet Condensation in Subcooled Water Flow in Pipes

Investigations on Hot Air Anti-Icing Characteristics with Internal Jet-Induced Swirling Flow

Experiment on Performance of Low-Temperature Exhaust Steam Reclamation

Experimental Study of Heat Transfer Characteristics of Pulsed Dry Ice Sublimation Spray Cooling with High Thermal Load

Numerical Study of Impinging Jets Heat Transfer with Different Nozzle Geometries and Arrangements for a Ground Fast Cooling Simulation Device

Ice breaking by a high-speed water jet impact

Investigation on Heat Transfer and Flow of a Sonic Steam Jet Condensation in Crossflow of Water in Pipes