Abstract:Effective thermal conductivity and thermal tortuosity are crucial parameters for evaluating the effectiveness of heat conduction within porous media. The direct pore-scale numerical simulation method is applied to investigate the heat conduction processes inside porous structures with different morphologies. The thermal conduction performances of idealized porous structures are directly compared with real foams across a wide range of porosity. Real foam structures are reconstructed using X-ray computed tomography and image processing techniques, while Kelvin and Weaire-Phelan structures are generated through periodic unit cell reconstruction. The detailed temperature fields inside the porous structures are determined by solving the heat conduction equation at the pore scale. The results present that the equivalent thermal conductivity of Kelvin and Weaire-Phelan structures is similar to and greater than that of the real foam structure with the same strut porosity. The thermal tortuosity of real foam structure is relatively larger and the heat conduction path becomes straighter by adopting the anisotropic design. The thermal tortuosity of the fluid channels for Kelvin, Weaire-Phelan, and real foam structures is close to one. The thermal conductivity of porous structures with heat transfer fluid increases as the thermal conductivity ratio of fluid to solid becomes larger. A small porosity of porous media leads to a larger equivalent thermal conductivity due to the dominant contribution of porous skeleton in the heat conduction process. Correlations derived from parallel and series models, as well as the Maxwell-Eucken models, provide decent predictions of effective thermal conductivity, with an average error of less than 8% in the entire range of thermal conductivity ratio.

Numerical Investigation on Heat Transfer and Melting Process of Ice with Different Porosities

Numerical Analysis of Heat Transfer Behaviours of Melting Process for Ice Thermal Storage Based on Various Heat Source Configurations

Experimental investigation and scale analysis on melting of salty ice in a 3D-printed cavity filled with porous media

Investigation of airflow thermal ice melting process under various flight conditions

Modelling and analysis of initial icing roughness with fixed-grid enthalpy method based on DPM-VOF algorithm

Numerical Simulation of the Melting of Solid Particles in Thermal Convection with a Modified Immersed Boundary Method

Modelling of the Melting Temperature of Nano-Ice in MCM-41 Pores

Heat transfer in the melting of ice slurry during flow in a vertical slit channel

Performance Prediction on Ice Melting Process for Cold Energy Utilization: Effect of Natural Convection

Theory of ice premelting in porous media

Study of the convective heat transfer during full melt off of ice slurry in laminar and non-Newtonian flows

Numerical Analysis of Melting Process in a Rectangular Enclosure with Different Fin Locations

Investigation of Heat and Mass Transfer Characteristics in the Ice Rink: Ice Making, Maintaining and Resurfacing Processes

Investigation on Phase Transition and Collection Characteristics of Non-Spherical Ice Crystals with Eulerian and Lagrangian Methods

Pore-scale investigation on the effect of icing on relative permeability of two-phase immiscible fluids

Numerical investigation on heat and mass transfer characteristics of ice slurry in pulsating flow

Numerical research on the solidification heat transfer characteristics of ice thermal storage device based on a compact multichannel flat tube-closed rectangular fin heat exchanger

Numerical Simulation of Ice Crystal Supercooled Droplet Mixed Phase Icing Based on the Improved Messinger Model

'Heat engine' mechanism of latent heat release during the recalescence stage in supercooled heterogeneous icing

Numerical study on the effective thermal conductivity and thermal tortuosity of porous media with different morphologies

Study on flow and heat transfer characteristics of salt solution ice slurry