Abstract:A series of ultra-clean, unsupported Cu-doped and Pd-doped Ni model catalysts was investigated to develop the fundamental concept of metal doping impact on the carbon tolerance and catalytic activity in the dry reforming of methane (DRM). Wet etching with concentrated HNO3 and a subsequent single sputter–anneal cycle resulted in the full removal of an already existing oxidic passivation layer and segregated and/or ambient-deposited surface and bulk impurities to yield ultra-clean Ni substrates. Carbon solubility, support effects, segregation processes, cyclic operation temperatures, and electronic and ensemble effects were all found to play a crucial role in the catalytic activity and stability of these systems, as verified by X-ray photoelectron spectroscopy (XPS) surface and bulk characterization. Minor Cu promotion showed the almost complete suppression of coking with a moderate reduction in catalytic activity, while high Cu loadings facilitated carbon growth alongside severe catalytic deactivation. The improved carbon resistance stems from an increased CH4 dissociation barrier, decreased carbon solubility in the bulk, good prevailing CO2 activation properties and enhanced CO desorption. Cyclic DRM operation on surfaces with Cu content that is too high leads to impaired carbon oxidation kinetics by CO2 and causes irreversible carbon deposition. Thus, an optimal and stable NiCu composition was found in the region of 70–90 atomic % Ni, which allows an appropriate high syngas production rate to be retained alongside a total coking suppression during DRM. In contrast, the more Cu-rich NiCu systems showed a limited stability under reaction conditions, leading to undesired surface and bulk segregation processes of Cu. The much higher carbon deposition rate and solubility of unsupported NiPd and Pd model catalysts results in severe carbon deposition and catalytic deactivation. To achieve enhanced carbon conversion and de-coking, an active metal oxide boundary is required, allowing for the increased clean-off of re-segregated carbon via the inverse Boudouard reaction. The carbon bulk diffusion on the investigated systems depends strongly on the composition and decreases in the following order: Pd > NiPd > Ni > NiCu > Cu.

Performance and Stability in CO2 Reforming of Methane over Neodymium Nickel Oxide Composite Catalysts

Nickel Catalyst with Atomically-Thin Meshed Cobalt Coating for Improved Durability in Dry Reforming of Methane

Modulating Proportion of Ni0 Species Stabilized by Ni2+ on Ni-MgO Catalyst with Superior Stability for Dry Reforming of Methane

Self-Confinement Created for a Uniform Ir–Ni/SiO2 Catalyst with Enhanced Performances on CO2 Reforming of Methane

Promoted coke resistance of Ni by surface carbon for the dry reforming of methane

Bimetallic Nickel-Cobalt catalysts and their application in dry reforming reaction of methane

On the catalytic nature of nitrided NiMo/γ-Al2O3 catalysts for dry reforming of methane

Development of Active and Stable Low Nickel Content Catalysts for Dry Reforming of Methane

Ni/CeO2 Catalyst Prepared via Microimpinging Stream Reactor with High Catalytic Performance for CO2 Dry Reforming Methane

Recent advances in promoting dry reforming of methane of Nickel-based catalysts

Emergent Ni catalysts induced by nitride-to-oxide transformation for coking and sintering resistant dry reforming of methane

Co–Ni Alloy Supported on CeO2 As a Bimetallic Catalyst for Dry Reforming of Methane

Improving the Anti-Coking Ability in the Ni-M(M = Ce, Zr, Co)@SiO2 Yolk-Shell Catalysts for Dry Reforming of Methane

Enhanced Methane Dry Reforming with Ni/SiO2 Catalysts Featuring Hierarchical External Nanostructures

Highly Efficient and Stable Methane Dry Reforming Enabled by a Single-Site Cationic Ni Catalyst

Catalytic Performance of Bimetallic Cobalt–Nickel/Graphene Oxide for Carbon Dioxide Reforming of Methane

Research Progress of Ni-based Composite Catalysts for Methane Dry Reforming

Controllable Preparation of Nano-Ni to Eliminate Step Edges of Carbon Deposition on Ni-Based Catalysts for Methane Dry Reforming

Remarkable Basic-Metal Oxides Promoted Confinement Catalysts for CO2 Reforming

Dry Reforming of Methane on NiCu and NiPd Model Systems: Optimization of Carbon Chemistry

Highly dispersed Ni/MgO-mSiO2 catalysts with excellent activity and stability for dry reforming of methane