Abstract:PtAl and MCrAlY coating were prepared on the fourth generation single crystal superalloy. The isothermal oxidation tests of superalloys with different coatings were performed at 1150 °C and 1200 °C in a muffle furnace with static air for 500 h. The isothermal oxidation behavior and mechanism of two coatings at 1150 °C and 1200 °C was investigated. MCrAlY coating improved oxidation resistance by forming adhesive oxide scales with pegs, and PtAl coating formed dense and coherent oxide scales on surface to hinder the diffusion of oxygen. Compared with two coatings, a smaller oxidize increasing weight of PtAl coating (0.54 mg/cm 2 ) than MCrAlY coating (2.48 mg/cm 2 ) indicated that PtAl coating presented a better oxidation resistance during oxidation test at ultra high temperature, although a significant interdiffusion behavior occurred between PtAl coating and substrate. Besides, the interactive behavior between Ru and coatings was also investigated. Ru in fourth generation single crystal superalloy could diffuse into β-NiAl phase of coatings, maintaining the integrity of coatings. The major difference between MCrAlY coating and PtAl coating came in the amounts of β-NiAl phase, which leading to the difference on the oxidation resistance between MCrAlY and PtAl. The mechanism about influence of temperature on the oxidation property on bare alloy, MCrAlY-DD91 and PtAl-DD91 was also discussed. Ultra high temperature would promote more elements to participate in the reaction with oxygen, change the compositions of oxide scale and phases, resulting to the spallation of oxide scale and decrease of oxidation resistance.

Chromium-Dependent Effect on Oxidation Behavior of Ni-Fe-Based Superalloy for Ultra-Supercritical Steam Turbine Applications: Influence of Temperature and Pure Steam

Effect of Alloying Additions on Oxidation Behaviors of Ni‐Fe Based Superalloy for Ultra‐Supercritical Boiler Applications

The Effects of Alloying Elements Cr, Al, and Si on Oxidation Behaviors of Ni-Based Superalloys

Influence of composition and heating schedules on compatibility of FeCrAl alloys with high-temperature steam

Effect Of Steam Temperature On Oxidation Behavior Of Gh2984 Alloy As A Candidate For 700 Degrees C Advanced Ultra-Supercritical Boilers

Effects of Long Term Thermal Exposure on Microstructure and Mechanical Property Evolution of a New Wrought Ni–Fe Based Superalloy

Effects of Ni and Cr on the high-temperature oxidation behavior and mechanisms of Co- and CoNi-base superalloys

Effect of Alloying Chemistry on Fireside Corrosion Behavior of Ni–Fe-Based Superalloy for Ultra-supercritical Boiler Applications

Oxidation Behavior of a New Fe–Ni–Cr-based Alloy in Pure Steam at 750 °C

Systematic investigation of the oxidation behavior of Fe-Cr-Al cladding alloys in high-temperature steam

Effect of Al content on steam oxidation behavior for ferritic Fe-21Cr-xAl alloys

High Temperature Oxidation of Superalloys in Steam Environment

High-Temperature Steam Oxidation and Surface Microstructure Evolution of Fe13Cr6Al(1–4)Mo0.15Y Alloys

Effect of coatings on oxidation behavior of a fourth generation Ni-based single crystal superalloys at ultra high temperature

Microstructural homogenization and high-temperature cyclic oxidation behavior of a Ni-based superalloy with high-Cr content

Effect of Cobalt Content on the Oxidation and Corrosion Behavior of Ni–Fe-Based Superalloy for Ultra-Supercritical Boiler Applications

Exploring the high-temperature steam oxidation behaviors of the lean-Cr (7–10 wt%) FeCrAl alloys

Effect of steam on high temperature oxidation behaviour of alumina-forming alloys

900 °C oxidation resistance of Ni-base superalloys alloyed with different refractory elements

Temperature-dependent evolution mechanism of interface microstructure between gradient MCrAlY coatings and nickel-based superalloy

Mechanism of Al on FeCrAl steam oxidation behavior and molecular dynamics simulations