Abstract:In this study, an advanced high-temperature-resistant silicate adhesive, SA-AN, was developed by using Ni 2 SiO 4 , Ti, ZrO and Si powders modified silica sol as resin matrix, Al powder and ZnO as curing agents for jointing SiC/SiC composites. The thermal and mechanical properties of SA-AN were evaluated. The structural evolution of SA-AN, the reaction process at the interface, and the fracture mode of the joint were comprehensively investigated. The adhesive was transformed into Al–Ni-rich intermetallic compound-reinforced ceramic composites at high temperatures. Moreover, interfacial reaction of adhesive with SiC/SiC substrate occurred and the resulting diffusion reaction layer effectively relieved the thermal stress between the adhesive and the SiC/SiC substrate. Due to the formation of intermetallic compounds and the occurrence of interfacial reaction, the mechanical properties and heat resistance of the joints were considerably improved. Tensile shear strength of the adhesive was 18.7 MPa after calcination at 600 °C and 17.9 MPa after calcination at 900 °C, which was 65.5% and 94.6% higher compared to the conventional silicate adhesive SA-A, respectively. After 50 cycles of RT-900 °C, tensile shear strength of SA-AN still achieved 10.3 MPa with a retention rate of 61.5%. Furthermore, the mixed fracture pattern of the adhesive joint containing SiC/SiC substrate damage was attained even at 1200 °C of calcination, indicating the effective adhesion at this temperature. As first reported in this study, SA-AN is an efficient high-temperature-resistant adhesive applicable for bonding SiC/SiC composites, which has wide application prospects in aerospace domain.

In Situ Growth of SiC Nanowires Toughened Preceramic Resin-Based Adhesive for Connecting Cf/C Composites in Extreme Environments

Mechanical properties and wear resistance of Cf / epoxy resin composites with in-situ grown SiC nanowires on carbon fibers

3C-SiC Nanowires In-Situ Modified Carbon/Carbon Composites and Their Effect on Mechanical and Thermal Properties

Advanced high-temperature-resistant silicate adhesive reinforced by intermetallic compounds for joining SiC/SiC composites

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Improvement of curing efficiency and heat resistance of CFRP by the growth of SiCNWs on CF

Preparation and Mechanical Behaviors of SiOC-modified Carbon-Bonded Carbon Fiber Composite with In-Situ Growth of Three-Dimensional SiC Nanowires

Significant Improvement of Mechanical Properties of SiC-Nanowire-Reinforced SiCf/SiC Composites via Atomic Deposition of Ni Catalysts

Effect of SiCnws on flexural strength of SiCf/HfC-SiC composites after impact and ablation

SiC fiber strengthened Si 14Ti high-temperature filler alloy for brazing SiC f /SiC and C/C composites

Effect of the Incorporation of SiC Nanowire with Double Protective Layers on SiC Coating for C/C Composites

Enhanced strength and toughness of SiC/C composite ceramics via SiC@graphene core–shell nanoparticles

Near-seamless joining of Cf/SiC composites using Y3Si2C2 via electric field-assisted sintering technique

Nano-infiltration and transient eutectic (NITE) joining of SiC ceramics applied for the harsh environments

Multifunctional Thermal Barrier Application Composite with SiC Nanowires Enhanced Structural Health Monitoring Sensitivity and Interface Performance.

Preparation and characterization of high hard and high tough ultrafine WC ceramics containing hybrid graphene and SiC nanowire

Microstructural evolution and properties enhancement of SiC refractory castables bonded with the special CNFs/calcium aluminate cement

Growing carbon nanotubes in-situ via chemical vapor deposition and resin pre-coating treatment on anodized Ti-6Al-4V titanium substrates for stronger adhesive bonding with carbon fiber composites

A user-friendly heat-resistant modified polymer-based adhesive for joining and repair of carbon/carbon composites

Enhanced Thermal Shock Resistance of High-Temperature Organic Adhesive by CF-SiCNWs Binary Phase Structure

Carbide assisted in-suit growth and formation mechanism of SiC nanowires on the surface of defined carbon fibers