Abstract:Silicon carbide nanoparticle-reinforced nickel-based composites（Ni–Si CNP）,with a Si CNPcontent ranged from1 to 3.5 wt%,were prepared using mechanical alloying and spark plasma sintering.In addition,unreinforced pure nickel samples were also prepared for comparative purposes.To characterize the microstructural properties of both the unreinforced pure nickel and the Ni–Si CNPcomposites transmission electron microscopy（TEM） was used,while their mechanical behavior was investigated using the Vickers pyramid method for hardness measurements and a universal tensile testing machine for tensile tests.TEM results showed an array of dislocation lines decorated in the sintered pure nickel sample,whereas,for the Ni–Si CNPcomposites,the presence of nano-dispersed Si CNPand twinning crystals was observed.These homogeneously distributed Si CNPwere found located either within the matrix,between twins or on grain boundaries.For the Ni–Si CNPcomposites,coerced coarsening of the Si CNPassembly occurred with increasing Si CNPcontent.Furthermore,the grain sizes of the Ni–Si CNPcomposites were much finer than that of the unreinforced pure nickel,which was considered to be due to the composite ball milling process.In all cases,the Ni–Si CNPcomposites showed higher strengths and hardness values than the unreinforced pure nickel,likely due to a combination of dispersion strengthening（Orowan effects） and particle strengthening（Hall–Petch effects）.For the Ni–Si CNPcomposites,the strength increased initially and then decreased as a function of Si CNPcontent,whereas their elongation percentages decreased linearly.Compared to all materials tested,the Ni–Si CNPcomposite containing 1.5% Si C was found more superior considering both their strength and plastic properties.

Significant Improvement of Mechanical Properties of SiC-Nanowire-Reinforced SiCf/SiC Composites via Atomic Deposition of Ni Catalysts

Mechanical properties and wear resistance of Cf / epoxy resin composites with in-situ grown SiC nanowires on carbon fibers

Significant improvement of mechanical properties of carbon/carbon composites by in situ growth of SiC nanowires

Electrophoretic Deposition of SiC Nanowires Onto Carbon/carbon Composites to Improve the Interface Bonding of Ti–Ni–Si Joint

3C-SiC Nanowires In-Situ Modified Carbon/Carbon Composites and Their Effect on Mechanical and Thermal Properties

Effect of Ni Coated SiC on Mechanical Properties of SiC/Fe Composites

SiC Nanowire Reinforced Carbon/carbon Composites with Improved Interlaminar Strength

Enhancement of the Oxidation Resistance of C/C Composites by Depositing SiC Nanowires Onto Carbon Fibers by Electrophoretic Deposition

Effect of SiC Nanowires Addition on the Interfacial Microstructure and Mechanical Properties of the Cf-SiCNWs/AZ91D Composite

Effect of In-Situ Grown SiC Nanowires on the Mechanical Properties of HfC-ZrB2-SiC Modified C/C Composites

Strengthening Behavior in SiC Nanowires Reinforced Pure Al Composite

Carbide assisted in-suit growth and formation mechanism of SiC nanowires on the surface of defined carbon fibers

Carbon Fiber/sic Composites Modified SiC Nanowires with Improved Strength and Toughness

Microstructures and Tensile Properties of Ultrafine-Grained Ni–（1–3.5） Wt% SiC NP Composites Prepared by a Powder Metallurgy Route

Effects of in situ formed nanostructures on the structure and properties of C/SiOC composites

Growth of SiC Nanowires by Low Pressure Chemical Vapor Infiltration Using Different Catalysts

In Situ Growth of SiC Nanowires Toughened Preceramic Resin-Based Adhesive for Connecting Cf/C Composites in Extreme Environments

Nickel-catalyzed Preparation of Self-Bonded SiC Refractories with Improved Microstructure and Properties

Fabrication of Ni@SiC Composite Nanofibers by Electrospinning and Autocatalytic Electroless Plating Techniques

Nanoparticulate Dispersion, Microstructure Refinement and Strengthening Mechanisms in Ni-coated SiCp/Al-Cu Nanocomposites

Strengthening of C/SiC Composites by Electrophoretic Deposition of CNTs on a SiC Coating